Read Sharp MX-PE10 FIERY (serv.man31) Technical Bulletin online
Page 2 of 2
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
Customer Support
Release Note
Before installing FIT220493.exe
1 Known issues listed below, read before installing FIT220493.exe patch:
•
None.
2 The following prerequisite(s) must be installed in the order specified before applying
FIT220493 patch:
• FIT206157
• FIT211917
• FIT206157
• FIT211917
• FIT207489
3 Do NOT install any of the following patch(es) after installing FIT220493 patch. If you must
install any of the patch(es) below, do so before installing FIT220493 patch:
• None.
• None.
4 This patch is exclusive which means it must be installed independently and the server
rebooted/restarted once. After which, other patches can be applied to the server.
Patch installation instructions
1 Make sure that the Fiery printer controller reaches Idle.
2 Execute FIT220493.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
2 Execute FIT220493.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
a. Logon must be admin. This is fixed and cannot be modified.
b. Password is the Fiery administrator login password.
c. Hostname can be the IP address or the Fiery server name.
4 After the patch is downloaded and when prompted by the Fiery Patch Downloader, choose
Reboot. (If you choose to Restart later, make sure you manually reboot the server for the
changes to take effect)
changes to take effect)
5 Wait until the Fiery controller reaches Idle and print the Configuration page.
6 Verify that the System Updates Log section contains the patch number FIT220493.
6 Verify that the System Updates Log section contains the patch number FIT220493.
Display