Read Sharp MX-PE10 FIERY (serv.man38) Technical Bulletin online
Page 1 of 3
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
©2012 Electronics For Imaging
Customer Support
Release Note
Fiery Patch Release Notes
General information
Defect ID number
FIT206157
Product name
MX-PE10
Release date
27 March 2014
Files included in this release
File name
File size
Md5 Checksum
FIT206157.exe
14926312 bytes
d3c4af52fcfc36f5cb58e1e75422fac0
Issue(s) addressed with this release
• FIT206157: Fiery patch to address booklet constraint issue.
• FIT206157: Booklet Error using Plockmatic
• FIT207795: GM 1.1 Problems with Full Bleed pamphlets - German FieryOS
• FIT207946: GM1.1 Paper Property - Load Plain Paper message
Steps to reproduce the Issue(s)
• FIT206157: Booklet Error using Plockmatic
Let the printer be connected to Plockmatic finisher.
1 Import a multipage PDF file to CWS hold queue.
2 Launch Job Properties and go to Layout tab Booklet Saddle Left binding
3 Media tab Paper size 11X17
2 Launch Job Properties and go to Layout tab Booklet Saddle Left binding
3 Media tab Paper size 11X17
4 Finishing tab Staple Mode Saddle Stitch.
Result: Constraint is observed.
• FIT207795: GM 1.1 Problems with Full Bleed pamphlets - German FieryOS
Set the server in German Language.
1 Import particular testfile to Command WorkStation Hold queue.
Page 2 of 3
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
2 Functionality to access to digital contents stored on copy-protected read-only media
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
©2012 Electronics For Imaging
Customer Support
Release Note
2 Select Job Properties Media Paper size 11X17 (Fullbleed); APPE OFF
3 Print the job.
3 Print the job.
Result: Job doesn’t print full bleed
• FIT207946: GM1.1 Paper Property - Load Plain Paper message
Set the server in German Language.
Load any LCT with A3 paper size and remaining trays with A4 paper size.
1 On the Engine create/register a Paper Catalogue for A3 paper size.
2 Launch Command WorkStation open Paper Catalogue window Duplicate the newly
2 Launch Command WorkStation open Paper Catalogue window Duplicate the newly
created/registered entry.
3 Edit the new entry with A3 fullbleed paper size
4 Import particular testfile and open Job Properties Media Paper size registered copy
4 Import particular testfile and open Job Properties Media Paper size registered copy
of the paper.
5 Print the job.
Result: Load Plain Paper message error prompt is observed
Before installing FIT206157.exe
1 Known issues listed below, read before installing FIT206157.exe patch:
•
This patch obsolete FIT205626 patch.
2 The following prerequisite(s) must be installed in the order specified before applying
FIT206157 patch:
• None
• None
3 Do NOT install any of the following patch(es) after installing FIT206157 patch. If you must
install any of the patch(es) below, do so before installing FIT206157 patch:
• FIT205626.
• FIT205626.
4 This patch is exclusive which means it must be installed independently and the server
rebooted/restarted once. After which, other patches can be applied to the server.
Page 3 of 3
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
Customer Support
Release Note
Patch installation instructions
1 Make sure that the Fiery printer controller reaches Idle.
2 Execute FIT206157.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
2 Execute FIT206157.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
a. Logon must be admin. This is fixed and cannot be modified.
b. Password is the Fiery administrator login password.
c. Hostname can be the IP address or the Fiery server name.
4 After the patch is downloaded and when prompted by the Fiery Patch Downloader, choose
Reboot. (If you choose to Restart later, make sure you manually reboot the server for the
changes to take effect)
changes to take effect)
5 Wait until the Fiery controller reaches Idle and print the Configuration page.
6 Verify that the System Updates Log section contains the patch number FIT206157.
6 Verify that the System Updates Log section contains the patch number FIT206157.