Read Sharp MX-PE10 FIERY (serv.man41) Technical Bulletin online
Page 1 of 2
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
©2012 Electronics For Imaging
Customer Support
Release Note
Fiery Patch Release Notes
General information
Defect ID number
FIT205626
Product name
MX-PE10
Release date
27 Feb 2014
Files included in this release
File name
File size
Md5 Checksum
FIT205626.exe
4.66 MB
de030e5951d91a4a88f8a509a92f43f7
Issue(s) addressed with this release
• FIT205626: Fiery patch to address preprinted booklet issue.
Steps to reproduce the Issue(s)
Place 11x17 paper size in the MX-CF11 Inserter upper tray and set the type to Heavy paper1.
Place 11x17 paper size in Tray 6 (MX-LC13 upper tray) and set the type to Plain.
Place 11x17 paper size in Tray 6 (MX-LC13 upper tray) and set the type to Plain.
1 Import a multipage PDF file to CWS hold queue.
2 Launch Job Properties and go to Job info tab Copies 9
3 Media tab Paper size 11X17
4 Go to Layout tab Booklet Saddle left; Cover Content input Pre-Printed
3 Media tab Paper size 11X17
4 Go to Layout tab Booklet Saddle left; Cover Content input Pre-Printed
5 Define Cover Media type Heavy paper1
6 Finishing tab Staple Mode Saddle Stitch.
7 Print the job
6 Finishing tab Staple Mode Saddle Stitch.
7 Print the job
Result: First set prints fine, following sets are not printed correctly. Pre-printed cover page and
body of the job folds separately
body of the job folds separately
Page 2 of 2
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
Customer Support
Release Note
Before installing FIT205626.exe
1 Known issues listed below, read before installing FIT205626.exe patch:
•
This patch obsolete FIT203523 patch.
2 The following prerequisite(s) must be installed in the order specified before applying
FIT205626 patch:
• None
• None
3 Do NOT install any of the following patch(es) after installing FIT205626 patch. If you must
install any of the patch(es) below, do so before installing FIT205626 patch:
• FIT203523.
• FIT203523.
4 This patch is exclusive which means it must be installed independently and the server
rebooted/restarted once. After which, other patches can be applied to the server.
Patch installation instructions
1 Make sure that the Fiery printer controller reaches Idle.
2 Execute FIT205626.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
2 Execute FIT205626.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
a. Logon must be admin. This is fixed and cannot be modified.
b. Password is the Fiery administrator login password.
c. Hostname can be the IP address or the Fiery server name.
4 After the patch is downloaded and when prompted by the Fiery Patch Downloader, choose
Reboot. (If you choose to Restart later, make sure you manually reboot the server for the
changes to take effect)
changes to take effect)
5 Wait until the Fiery controller reaches Idle and print the Configuration page.
6 Verify that the System Updates Log section contains the patch number FIT205626.
6 Verify that the System Updates Log section contains the patch number FIT205626.
Display