Read Sharp MX-PE10 FIERY (serv.man33) Technical Bulletin online
Page 1 of 2
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
©2012 Electronics For Imaging
Customer Support
Release Note
Fiery Patch Release Notes
General information
Defect ID number
FIT207489
Product name
MX-PE10
Release date
23 June 2104
Files included in this release
File name
File size
Md5 Checksum
FIT207489.exe
18158184 bytes
1a32e7a36f79d9479b7dfc34fa282eb5
Issue(s) addressed with this release
• FIT208794: Feature Request - Full bleed print in custom size paper
Steps to use the new feature
1 Import full bleed jobs (A3 and 11x17) to CWS
2 Open JP and go to Layout tab.
3 Select Booklet and set Custom paper size within the range Y = 279 or 297mm and X = 420 to
2 Open JP and go to Layout tab.
3 Select Booklet and set Custom paper size within the range Y = 279 or 297mm and X = 420 to
488mm
4 Uncheck the shrink to fit check box.
5 Go to Media Tab and Check the Custom Full bleed check box and Print the job.
5 Go to Media Tab and Check the Custom Full bleed check box and Print the job.
Result: Custom full bleed jobs will be printed.
Before installing FIT207489.exe
1 Known issues listed below, read before installing FIT207489 patch:
•
Rip error will be observed when Ledger and A3 standard paper sizes are printed as
custom. This is as per design.
custom. This is as per design.
2 The following prerequisite(s) must be installed in the order specified before applying
FIT207489 patch:
• FIT211917.
• FIT211917.
3 Do NOT install any of the following patch(es) after installing FIT207489 patch. If you must
install any of the patch(es) below, do so before installing FIT207489 patch:
Page 2 of 2
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
Customer Support
Release Note
• None.
4 This patch is exclusive which means it must be installed independently and the server
rebooted/restarted once. After which, other patches can be applied to the server.
Patch installation instructions
1 Make sure that the Fiery printer controller reaches Idle.
2 Execute FIT207489.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
2 Execute FIT207489.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
a. Logon must be admin. This is fixed and cannot be modified.
b. Password is the Fiery administrator login password.
c. Hostname can be the IP address or the Fiery server name.
4 After the patch is downloaded and when prompted by the Fiery Patch Downloader, choose
Reboot. (If you choose to Restart later, make sure you manually reboot the server for the
changes to take effect)
changes to take effect)
5 Wait until the Fiery controller reaches Idle and print the Configuration page.
6 Verify that the System Updates Log section contains the patch number FIT208794.
6 Verify that the System Updates Log section contains the patch number FIT208794.
