Read Sharp MX-PE10 FIERY (serv.man34) Technical Bulletin online
Page 1 of 2
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
©2012 Electronics For Imaging
Customer Support
Release Note
Fiery Patch Release Notes
General information
Defect ID number
FIT211917
Product name
MX-PE10
Release date
14 May 2014
Files included in this release
File name
File size
Md5 Checksum
FIT211917.exe
4904904 bytes
5fedbdd37e3237a9e7f057a691fca7db
Issue(s) addressed with this release
• FIT211917: Fiery patch to address rip error issue for particular Media type.
Steps to reproduce the Issue(s)
1 Import particular testfile to Command WorkStation Hold queue.
2 Open Job Properties Media tab Media type Thin paper.
3 Print the job.
3 Print the job.
Result: Fiery rip error is observed.
Before installing FIT211917.exe
1 Known issues listed below, read before installing FIT211917.exe patch:
•
None.
2 The following prerequisite(s) must be installed in the order specified before applying
FIT211917 patch:
• FIT206157.
• FIT206157.
3 Do NOT install any of the following patch(es) after installing FIT211917 patch. If you must
install any of the patch(es) below, do so before installing FIT211917 patch:
• None.
• None.
4 This patch is exclusive which means it must be installed independently and the server
rebooted/restarted once. After which, other patches can be applied to the server.
Page 2 of 2
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
Customer Support
Release Note
Patch installation instructions
1 Make sure that the Fiery printer controller reaches Idle.
2 Execute FIT211917.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
2 Execute FIT211917.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
a. Logon must be admin. This is fixed and cannot be modified.
b. Password is the Fiery administrator login password.
c. Hostname can be the IP address or the Fiery server name.
4 After the patch is downloaded and when prompted by the Fiery Patch Downloader, choose
Reboot. (If you choose to Restart later, make sure you manually reboot the server for the
changes to take effect)
changes to take effect)
5 Wait until the Fiery controller reaches Idle and print the Configuration page.
6 Verify that the System Updates Log section contains the patch number FIT211917.
6 Verify that the System Updates Log section contains the patch number FIT211917.
