AL-1566 (serv.man8). Unpacking and installation - Sharp Copying Equipment Service Manual (repair manual). Page 10

Read Sharp AL-1566 (serv.man8) Service Manual online

AL-1556/1566  UNPACKING AND INSTALLATION  5 - 10
10. Interface
A. USB
Connector
4-pin ACON UBR23-4K2200
Type-B connector
Cable
Shielded twisted pair cable
(2 m (6 feet) Max.: high-speed transmission equivalent)
Pin configuration
The pin numbers and signal names are listed in the following table.
B. RJ45
RJ-45 connector pin arrangement
11. Moving
Moving instructions
When moving the unit, follow the procedure below.
Note: When moving this unit, be sure to remove the TD cartridge in
advance.
1) Turn the power switch off and remove the power cord from the out-
let.
2) Open the side cover and front cover, in that order. Remove the TD
cartridge and close the front cover and side cover, in that order.
To open and close the side cover and front cover, and to remove
the TD cartridge.
3) Raise the handle of the paper tray and pull the paper tray out until it
stops.
4) Push the center of the pressure plate down until it locks in place
5) Push the paper tray back into the unit.
6) Lock the scan head locking switch.
Note: When shipping the unit, the scan head locking switch must be
locked to prevent shipping damage.
7) Close the multi-bypass tray and the paper output tray extension,
and attach the packing materials and tape which were removed
during installation of the unit.
8) Pack the unit into the carton.
Pin No.
Signal name
1
+5V
2
-DATA
3
+DATA
4
GND
Pin No.
Signal name
LAN adapter RJ-45 connector
1
TD +
Send output +
2
TD –
Send output -
3
RD +
Receive input +
6
RD –
Receive input -
4, 5, 7, 8
Not used.
Not used.
1
2
3
4
1
8
Page of 10
Display

Download Sharp AL-1566 (serv.man8) Service Manual (Repair Manual)

Found More:

AL-1566 (serv.man8) Service Manuals

Preview DownloadPagesSize
AL-1566 (serv.man3) Cover and contents Service Manual 5 124.39 KB
AL-1566 (serv.man4) General Service Manual 1 70.1 KB
AL-1566 (serv.man5) Specifications Service Manual 8 123.02 KB
AL-1566 (serv.man6) Consumable parts Service Manual 2 78.57 KB
AL-1566 (serv.man7) External views and internal structures Service Manual 6 356.23 KB
AL-1566 (serv.man9) Copy process Service Manual 4 110.87 KB
AL-1566 (serv.man10) Operational descriptions Service Manual 9 455.16 KB
AL-1566 (serv.man11) Disassembly and assembly Service Manual 23 3.35 MB
AL-1566 (serv.man12) Adjustments Service Manual 8 287.68 KB
AL-1566 (serv.man13) Test command, fax soft switch, trouble codes Service Manual 72 450.17 KB
AL-1566 (serv.man14) User program Service Manual 2 82.77 KB
AL-1566 (serv.man15) Electrical section Service Manual 61 2.21 MB
AL-1566 (serv.man16) Circuit diagarm Service Manual 49 2 MB
AL-1566 (serv.man17) Service manual Service Manual 127 9.89 MB
AL-1566 (serv.man40) AL1566 operation manual, part-2 Set up the software, printer scanner functions, user settings, troubleshooting and maintenance, appendix. User Guide / Operation Manual 75 1.37 MB
AL-1566 (serv.man38) AL 1566 Fax Function Operation Manual User Guide / Operation Manual 96 3.9 MB
AL-1566 (serv.man41) Complete operation manual User Guide / Operation Manual 116 3.94 MB
AL-1566 (serv.man39) AL1566 operation manual, part-1 Cover contents, preparations, loading paper, making copies, convenient copy functions. User Guide / Operation Manual 41 2.05 MB
AL-1566 (serv.man71) Initial USB Production Driver for Win9X (Rev 1.30) Drivers 1.56 MB
AL-1566 (serv.man65) TWAIN Driver. Windows Vista Drivers 6.45 MB
AL-1566 (serv.man66) Button Manager. Windows Vista Drivers 4.02 MB
AL-1566 (serv.man67) Initial USB Production Driver for Win2K (Rev 1.30) Drivers 1.34 MB
AL-1566 (serv.man68) Initial USB Production Driver for WinXP (Rev 1.30) Drivers 1.34 MB
AL-1566 (serv.man69) Initial USB Production Driver for WinNT4.0 (Rev 1.30) Drivers 1.35 MB
AL-1566 (serv.man70) Initial USB Production Driver for WinMe (Rev 1.30) Drivers 1.53 MB
AL-1566 (serv.man37) Parts guide Parts Guide 40 1.77 MB
AL-1566 (serv.man36) Update of parts guide, section 23 NIC PWB Parts Guide 2 40.92 KB
AL-1566 (serv.man35) Exteriors and Section 2 RSPF Exteriors . Parts Guide 144.17 KB
AL-1566 (serv.man34) PME 121 Parts Guide changes for Sections 1 (Exteriors), 2 (RSPF Exteriors). Parts Guide 144.17 KB
AL-1566 (serv.man33) RSPF Transport Unit, 8 - Shifter Unit, 11 - Base Plate Unit 2. Parts Guide 7 370.19 KB
AL-1566 (serv.man31) Exteriors, 2 - RSPF exteriors. Parts Guide 5 160.15 KB
AL-1566 (serv.man30) RSPF Exteriors, 12 - Fusing Unit, 18 - 250 Sheets tray. Parts Guide 6 288.81 KB
AL-1566 (serv.man29) RSPF exteriors, 3 - RSPF transport unit, 4 - RSPF pick up unit, 6 - Side door unit, 7 - Optical frame, 8 - Shifter unit, 10 - Base plate unit 1, 13 - drive unit, 15 - Multi manual paper feeding unit, 18 - 250 sheets tray. Parts Guide 18 912.55 KB
AL-1566 (serv.man28) RSPF exteriors, 7 - Optical frame, 10 - Base plate unit 1, 12 - Fusing unit, 18 - 250 sheet tray, 20 - Packing material accessories. Parts Guide 12 634.2 KB
AL-1566 (serv.man32) RSPF pick up unit, 8 - Shifter unit, 10 - Base plate unit 1 20 - Packing material accessories. Parts Guide 9 409.57 KB
AL-1566 (serv.man27) Middle frame, 20 Packing material accessories. Parts Guide 5 227.75 KB
AL-1566 (serv.man26) Information of parts changes to sections 3 PSPF transport unit, 4 RSPF pick up unit, 8 Shifter unit, 9 Middle frame, 15 Multi manual paper feeding unit, 20 Packing material accessories. Parts Guide 13 572.52 KB
AL-1566 (serv.man25) Information of parts changes to sections 5 Operation panel, 21 Operation PWB, 25 Fax operation PWB (AL1566). Parts Guide 4 169.41 KB
AL-1566 (serv.man24) Information of parts change to section 21-Operation PWB. Parts Guide 2 46.9 KB
AL-1566 (serv.man18) Information of parts change Parts Guide 2 452.53 KB
AL-1566 (serv.man19) Information of parts change Parts Guide 2 28.25 KB
AL-1566 (serv.man20) Information of parts change Parts Guide 3 1.09 MB
AL-1566 (serv.man21) Information of parts change. Parts Guide 4 30.17 KB
AL-1566 (serv.man22) Strength increase of the turn over gate to prevent breakage. Parts Guide 3 58.91 KB
AL-1566 (serv.man23) Information of parts change To improve productivity, the L pulley has been changed Parts Guide 2 20.3 KB
AL-1566 (serv.man2) Supply of the upper heat roller for preventing toner adhesion, as a service part Specification 2 40.18 KB
AL-1566 PARTS SUCH AS SIDE DOOR DETECT SWITCH UNIT CHANGE IN SHAPE FOR PRODUCTIVITY IMPROVEMENT Specification 3 162.03 KB
AL-1566 (serv.man60) Copy speeds on duplex copying or when using two sided originals. Technical Bulletin 1 10.86 KB
AL-1566 (serv.man46) Manual paper feed roller material change. Technical Bulletin 5 342.3 KB
AL-1566 (serv.man47) MODIFICATION OF PAPER FEED ROLLER HOLDER ETC. TO IMPROVE PRODUCTIVITY Technical Bulletin 5 290.28 KB
AL-1566 (serv.man64) ROM version upgrade Technical Bulletin 2 171.34 KB
AL-1566 (serv.man63) 1. Rear cover change, 2. Scanner motor change, 3. Shape change of the u-turn guide lower. Technical Bulletin 3 69.41 KB
AL-1566 (serv.man62) ROM version upgrade 7 Technical Bulletin 1 8.51 KB
AL-1566 (serv.man61) Information of parts change, 1 Transport belt change, 2 MFD sensor PWB change, 3 Transport clutch change, 4 Standardisation of separator pawl, 5 POD PPD1 sensor PWB change. Technical Bulletin 5 302.36 KB
AL-1566 (serv.man48) PICK UP ROLLER ON MULTI PAPER FEED UNIT CHANGE IN SHAPE Technical Bulletin 2 26.52 KB
AL-1566 (serv.man59) ROM version upgrade..8 Technical Bulletin 2 9.26 KB
AL-1566 (serv.man58) 1 Changing the SPF photo sensor to comply with RoHS. 2 Changing the solenoids to comply with RoHS. 3 Shape change of the 250 tray side plates F R. 4 Shape change of the open and shut exterior. Technical Bulletin 7 162.96 KB
AL-1566 (serv.man57) 1. Changing the MCU PWB, 2. Changing the shafts to comply with RoHS, 3. Changing the LSU unit to comply with RoHS, 4. Changing the rollers to comply with RoHS Technical Bulletin 9 403.02 KB
AL-1566 (serv.man56) 1. Standardising the MC harness unit, 2. Changing the CD-ROM, 3. Changing the screws to comply with RoHS. Technical Bulletin 7 682.51 KB
AL-1566 (serv.man55) Main motor change, 2 - AC power cord change. Technical Bulletin 3 70.81 KB
AL-1566 (serv.man54) Change of operation pwb to comply with RoHS. Technical Bulletin 4 97.84 KB
AL-1566 (serv.man53) Improvement of the scanner's dust-proof property. Technical Bulletin 6 558.43 KB
AL-1566 (serv.man52) Engagement improvement of the claw in the manual paper feeding tray storage section of the side door Technical Bulletin 1 54.41 KB
AL-1566 (serv.man51) Countermeasures when the main unit cannot be searched automatically during the driver installation. Technical Bulletin 7 486.6 KB
AL-1566 (serv.man50) Enhancement of countermeasures against E1-00 communication trouble when turning on the power. Technical Bulletin 3 167.02 KB
AL-1566 (serv.man49) DCE733--Countermeasure against jam due to insufficient return force of the delivery actuator spring in the shifter unit Technical Bulletin 2 203.99 KB
AL-1566 (serv.man45) Firmware Update MCU v2.04, IMC v4.02 Firmware Upgrade Tool and Firmware upgrade details enclosed. Driver / Update 1.33 MB
AL-1566 (serv.man44) Firmware Rom Control N0 B04. MCU v3.01, IMC V4.03. Integrated Upgrade Utility and change history enclosed. Driver / Update 1.35 MB
AL-1566 (serv.man43) Upgrade Utility change details enclosed. Driver / Update 1.35 MB
AL-1566 (serv.man42) Button Manager for Vista XP Win7 and all 64 bit OS. Driver / Update 4.29 MB

Random: