AL-1566 (serv.man8). Unpacking and installation - Sharp Copying Equipment Service Manual (repair manual). Page 4

AL-1556/1566  UNPACKING AND INSTALLATION  5 - 4

Check the following hardware and software requirements in order to
install the software.

*

1

The machine's USB port will transfer data at the speed specified by
the USB 2.0 (Hi-Speed) only if the Microsoft USB 2.0 driver is prein-
stalled in the computer, or if the USB 2.0 driver for Windows 2000
Professional/XP that Microsoft provides through its "Windows
Update" is installed.

*

2

Compatible with Windows 98, Windows Me, Windows 2000 Profes-
sional, Windows XP Professional or Windows XP Home Edition
preinstalled model standardly equipped with a USB port.

*

3

Printing is not available in MS-DOS mode.

*

4

The machine does not support printing from a Macintosh environ-
ment.

*

5

Administrator's rights are required to install the software using the
installer.

The following table shows the drivers and software that can be
installed for each version of Windows and port connection method.

*1 Windows 98/Me does not support USB 2.0. A USB 2.0 connection

can be used in Windows 98/Me, however, the performance will be
the same as USB 1.1. The print speed based on USB 2.0 specifica-
tions can only be attained if your computer is running Windows
2000/XP, you are using a cable that supports USB 2.0 (USB 1.1 or
USB 2.0 certified), and the cable is connected to a USB 2.0 port on
your computer. If the connection is made through a hub, the hub
must support USB 2.0.

*

2

The printer driver that is installed will vary depending on the type of
connection between the machine and your computer.

Note:

• If you need to use a different connection method after installing the

software using a USB or network connection, you must first uninstall
the software and then install it using the new connection method.

• In the following explanations it is assumed that the mouse is config-

ured for right hand operation.

• The scanner feature only works when using a USB cable.

• If an error message appears, follow the instructions on the screen to

solve the problem. After the problem is solved, the installation proce-
dure will continue. Depending on the problem, you may have to click
the "Cancel" button to exit the installer. In this case, reinstall the soft-
ware from the beginning after solving the problem.

• When installing Sharpdesk, a minimal version of Internet Explorer

5.01 will be installed on your computer if your computer does not
currently have Internet Explorer version 4.01 or later.

1) The USB cable must not be connected to the machine. Make sure

that the cable is not connected before proceeding.

If the cable is connected, a Plug and Play window will appear. If this
happens, click the "Cancel" button to close the window and discon-
nect the cable.

Note: The cable will be connected in step 15.

2) Insert the CD-ROM into your computer's CD-ROM drive.

3) Click the "start" button, click "My Computer", and then double-click

the CD-ROM icon.

In Windows 98/Me/2000, double-click "My Computer", and then
double-click the CD-ROM icon.

4) Double-click the "setup" icon.

Note: If the language selection screen appears after you double click

the "setup" icon, select the language that you wish to use and
click the "Next" button. (Normally the correct language is
selected automatically.)

5) The "SOFTWARE LICENCE" window will appear. Make sure that

you understand the contents of the software licence, and then click
the "Yes" button.

6) Read the "Readme First" in the "Welcome" window and then click

the "Next" button.

7) To install all of the software, click the "Standard" button.

To install particular packages, click the "Custom" button.

If you selected "Custom", go to step 9.

8) Read the message in the "Welcome" window and then click the

"Next" button.

If you selected "Standard" in step 7, installation will begin.

Go to step 14.

9) If you clicked the "Custom" button, select the checkboxes of the

software packages to be installed and then click the "Next" button.

Click the "Display README" button to show information on pack-
ages that are selected.

Computer type IBM PC/AT or compatible computer equipped with a 

USB2.0*

1

/1.1*

2

 or 10Base-T LAN port

Operating 
system*

3 

*

4

Windows 95, Windows 98, Windows Me, Windows 
NT Workstation 4.0 (ServicePack 5 or later)*

5

, 

Windows 2000 Professional*

5

, Windows XP 

Professional*

5

, Windows XP Home Edition*

5

 

Display

800 x 600 dots (SVGA) display with 256 colors (or 
better)

Hard disk free 
space

150MB or more

Other hardware 
requirements

An environment on which any of the operating 
systems listed above can fully operate

Cable

Operating system

MFP Driver

Button 

Manager

Sharpdesk

Printer 

driver

Scanner 

driver

USB
*

1

Windows 98/Me/
2000/XP

Available
*

2

Available

LAN

Windows 95/98/Me/ 
NT 4.0/2000/XP

Not Available