Read Sharp AL-1566 (serv.man14) Service Manual online
AL-1556/1566 USER PROGRAM 11 - 1
[11] USER PROGRAM
The user settings consist of the following items.
1. User programs
A. Copy mode
Program
number
Program name
Setting codes
(factory default setting
appears in bold)
Explanation
1
AUTO CLEAR
1: 10 SEC.
2: 30 SEC.
3: 60 SEC.
4: 90 SEC.
5: 120 SEC.
6: OFF
2: 30 SEC.
3: 60 SEC.
4: 90 SEC.
5: 120 SEC.
6: OFF
• Auto clear time automatically returns the copy settings to the initial settings if no
keys are pressed for a preset period of time following the end of a copy job.
• This program is used to select the period of time. Auto clear time can also be
disabled.
2
PREHEAT MODE
1: 30 SEC.
2: 1 MIN.
3: 5 MIN.
4: 30 MIN.
5: 60 MIN.
6: 120 MIN.
7: 240 MIN.
2: 1 MIN.
3: 5 MIN.
4: 30 MIN.
5: 60 MIN.
6: 120 MIN.
7: 240 MIN.
• This function automatically switches the machine to a low power consumption
state if the set duration of time elapses without the machine being used when the
power is on. The power save indicator lights up, however, the keys on the
operation panel can be used. Normal operation automatically resumes when a key
on the operation panel is pressed, an original is placed, a print job is received.
power is on. The power save indicator lights up, however, the keys on the
operation panel can be used. Normal operation automatically resumes when a key
on the operation panel is pressed, an original is placed, a print job is received.
3
AUTO SHUT-OFF
1: ON
2: OFF
2: OFF
• Use this setting to enable or disable auto power shut-off mode.
4
AUTO SHUT-OFF
TIME
TIME
1: 5 MIN.
2: 30 MIN.
3: 60 MIN.
4: 120 MIN.
5: 240 MIN.
2: 30 MIN.
3: 60 MIN.
4: 120 MIN.
5: 240 MIN.
• This function automatically switches the machine to a state that consumes even
less power than preheat mode if the set duration of time elapses without the
machine being used when the power is on. All lights except the power save
indicator go off. To resume normal operation, press the [START] key. Normal
operation also resumes automatically when a print job is received or scanning is
begun from a computer. While in auto power shut-off mode, no keys (except the
[START] key) can be used.
machine being used when the power is on. All lights except the power save
indicator go off. To resume normal operation, press the [START] key. Normal
operation also resumes automatically when a print job is received or scanning is
begun from a computer. While in auto power shut-off mode, no keys (except the
[START] key) can be used.
5
STREAM FEEDING
1: ON
2: OFF
2: OFF
• When copying using the RSPF, while "SET ORIGINALS FOR STREAM
FEEDING." appears in the display after an original has been scanned (about 5
seconds), a subsequent original can be placed and automatically fed into the
machine.
seconds), a subsequent original can be placed and automatically fed into the
machine.
6
LAYOUT IN 2IN1
1: PATTERN 1
2: PATTERN 2
2: PATTERN 2
• Use this setting to select the layout pattern when two original pages are copied
onto a single sheet of paper.
7
OFFSET
FUNCTION
FUNCTION
1: ON
2: OFF
2: OFF
• When enabled, this function offsets the position in the paper output tray of sets of
copies during sort copy or copy job, and print jobs when using the printer function.
8
ROTATE ORIG.
IMAGE
IMAGE
1: ON
2: OFF
2: OFF
• When two-sided copying is performed, this function rotates the image on the back
of the original. This is convenient when binding the copies at the top (tablet
binding).
binding).
9
AE/TEXT
RESOLUTION
RESOLUTION
1: 300dpi
2: 600dpi
2: 600dpi
• The copy resolution in auto and text mode is normally 300 dpi. If high-quality
copies are preferred, use this setting to change the resolution to 600 dpi.
10
2-SIDED COPY
MODE
MODE
1: HI-SPEED
2: NORMAL
2: NORMAL
• If the memory fills up when two-sided copying is performed, "NORMAL" can be
selected to make copying possible. However, "NORMAL" results in a slower
copying speed. Normally "HI-SPEED" is selected to enable fast two-sided
copying.
copying speed. Normally "HI-SPEED" is selected to enable fast two-sided
copying.
11
MARGIN WIDTH
1: 1/4"
2: 1/2"
3: 3/4"
4: 1"
2: 1/2"
3: 3/4"
4: 1"
• Use this setting to set the margin width.
12
MEM. FOR
PRINTER
PRINTER
1: 30%
2: 40%
3: 50%
4: 60%
5: 70%
2: 40%
3: 50%
4: 60%
5: 70%
• Use this to change the proportion of machine memory used for printer mode.
13
AUTO KEY REPEAT
1: ON
2: OFF
2: OFF
• Use this setting to select whether or not holding down a key causes repeated input
of the key. For keys that normally cause a set value to increase when held down
(for example, holding down the [<] key [v] or [>] key [^]), this program can be used
to have the set value not change when the key is held down.
(for example, holding down the [<] key [v] or [>] key [^]), this program can be used
to have the set value not change when the key is held down.
14
KEY PRESS TIME
1: NORMAL
2: 0.5 SEC.
3: 1.0 SEC.
4: 1.5 SEC.
5: 2.0 SEC.
2: 0.5 SEC.
3: 1.0 SEC.
4: 1.5 SEC.
5: 2.0 SEC.
• Use this setting to select how long a key must be pressed for the input to be
accepted. By selecting a longer time, you can prevent settings from being
changed by the accidental pressing of a key.
changed by the accidental pressing of a key.
15
KEY TOUCH
SOUND
SOUND
1: LOW
2: HIGH
3: OFF
2: HIGH
3: OFF
• This sets the volume of beep signals.
AL-1556/1566 USER PROGRAM 11 - 2
B. Print mode
*
1
: The scanning speed increases when the USB 2.0 mode is set to "HI-SPEED", however, the printing speed does not increase considerably.
2. Selecting a setting for a user program
1) Press the [MENU] key and then press the [OK] key.
In printer mode, the user programs are accessed by simply press-
ing the [MENU] key.
ing the [MENU] key.
2) Press the [<] key [v
]
or [
>
] key [
^]
to select the item that you wish
to configure in the USER PROGRAM items, and then press the
[OK] key.
[OK] key.
• You can also select a program by directly entering the program
number with the numeric keys.
3) Press the [
<
] key [v] or [
>
] key [^] to change the setting of the
selected item.
NOTE:
• If you mistakenly select the wrong item, press the [CLEAR] key [C]
and repeat the procedure from step 2.
• To cancel a setting for a user program, press the [MENU] key.
4) Press the [OK] key.
Your selection appears briefly and then the previous screen
appears.
appears.
NOTE:
When "AE LEVEL ADJUST" is selected in the user programs and the
[OK] key is pressed, the automatic exposure adjustment screen
appears. Adjust the exposure and press the [OK] key.
[OK] key is pressed, the automatic exposure adjustment screen
appears. Adjust the exposure and press the [OK] key.
16
SOUND AT
DEFAULT
DEFAULT
1: ON
2: OFF
2: OFF
• Use this to sound a beep when a base setting is selected.
17
TONER SAVE
MODE
MODE
1: ON
2: OFF
2: OFF
• This mode reduces toner usage by about 10% when copying. Toner save mode is
effective when the exposure mode is AUTO or TEXT.
18
AE LEVEL ADJUST
1: SPF/RSPF
2: DOCUMENT GLASS
2: DOCUMENT GLASS
• This is used to adjust the exposure level.
• The automatic exposure level can be adjusted separately for the document glass
• The automatic exposure level can be adjusted separately for the document glass
and the RSPF.
19
LANGUAGE
1: AMERICAN ENGLISH
This is used to set the language used in the display.
20
RESET FACTORY
1: Yes
2: No
2: No
This is used to return all settings to the factory default settings.
21
SORT AUTO
SELECT
SELECT
1: ON
2: OFF
2: OFF
Used to sort SPF/RSPF copies automatically.
Program
number
Program name
Setting codes
(factory default setting
appears in bold)
Explanation
Program
number
Program name
Setting codes
(factory default setting
appears in bold)
Explanation
1
FORCED OUTPUT
1: ON
2: OFF
2: OFF
When this function is enabled, printing in printer mode will automatically continue
using a different size of paper if the specified size of paper runs out in all trays. This
feature does not function in copy mode.
using a different size of paper if the specified size of paper runs out in all trays. This
feature does not function in copy mode.
2
USB 2.0 MODE
SWITCH *
SWITCH *
1
1: FULL-SPEED
2: HI-SPEED
2: HI-SPEED
1
1
2
2
2
2
1
1
1,2,3,
1,2,3,
SP. FUNC
AUTO
ZOOM
OK
MAIN MENU
1:USER PROGRAM
1:USER PROGRAM
1
1
2
2
2
2
1
1
1,2,3,
1,2,3,
SP. FUNC
AUTO
ZOOM
OK
USER PROGRAM
2:PREHEAT MODE
2:PREHEAT MODE
1
1
2
2
2
2
1
1
1,2,3,
1,2,3,
SP. FUNC
AUTO
ZOOM
OK
PREHEAT MODE
1:30 SEC.
1:30 SEC.
Audible signals (key entry beep, invalid key beep, base setting
beep)
beep)
The machine sounds three different types of beep signals: a key
entry beep that sounds when a valid key is pressed, an invalid key
beep that sounds when an invalid key is pressed, and a base setting
beep that sounds when a setting is the same as the base setting
(base settings are explained below). The base setting beep is initially
disabled. If you wish to enable the base setting beep, see "SOUND
AT DEFAULT". If you wish to change the volume of the beep signals
or disable them, see "KEY TOUCH SOUND".
entry beep that sounds when a valid key is pressed, an invalid key
beep that sounds when an invalid key is pressed, and a base setting
beep that sounds when a setting is the same as the base setting
(base settings are explained below). The base setting beep is initially
disabled. If you wish to enable the base setting beep, see "SOUND
AT DEFAULT". If you wish to change the volume of the beep signals
or disable them, see "KEY TOUCH SOUND".
The beep patterns of each type of beep signal are as follows:
Key entry beep: One beep
Invalid key beep: Two beeps
Key entry beep: One beep
Invalid key beep: Two beeps
Base setting beep: Three beeps
Base settings
The base settings are preset standard selections for each copy set-
ting. The base settings are as follows:
Copy ratio: 100%
Light and Dark level: center
ting. The base settings are as follows:
Copy ratio: 100%
Light and Dark level: center
Paper feed location: Paper tray
AUTO/TEXT/PHOTO: AUTO
AUTO/TEXT/PHOTO: AUTO
Display