AL-1566 (serv.man8). Unpacking and installation - Sharp Copying Equipment Service Manual (repair manual). Page 9

AL-1556/1566  UNPACKING AND INSTALLATION  5 - 9

4) Select "SC1:" from the "Select an event" pull-down menu.

5) Select "Start this program" and then select "Sharp Button Manager

B" from the pull-down menu.

6) Click the "Apply" button.

7) Repeat Steps 4 through 6 to link Button Manager to "SC2:" through

"SC6:".

Select "SC2:" from the "Select an event" pull-down menu. Select
"Start this program", select "Sharp Button Manager B" from the pull-
down menu, and then click the "Apply" button. Do the same for
each ScanMenu through "SC6:".

When the settings have been completed, click the "OK" button to
close the screen.

Button Manager is now linked to the scan menu (1 through 6).

The scan settings for each of scan menu 1 through 6 can be changed
with the setting window of Button Manager.

For the factory default settings of the scan menu. For the procedures
for configuring Button Manager settings, see "Button Manager Set-
tings" in the Online Manual.

1) click the "Start" button, select "Settings", and then click "Control

Panel".

2) Double-click the "Scanners and Cameras" icon.

Note: If the "Scanners and Cameras" icon does not appear in

Windows Me, click "view all Control Panel options".

3) Select "SHARP AL-XXXX" and click the "Properties" button.

In Windows Me, right click "SHARP AL-XXXX" and click "Proper-
ties" in the pop-up menu.

4) In the "Properties" screen, click the "Events" tab.

5) Select "SC1:" from the "Scanner events" pull-down menu.

6) Select "Sharp Button Manager B" in "Send to this application".

Note: If other applications are shown, deselect the checkboxes for the

other applications and leave only the Button Manager checkbox
selected.

7) Click the "Apply" button.

8) Repeat Steps 5 through 7 to link Button Manager to "SC2:" through

"SC6:".

Select "SC2:" from the "Scanner events" pull-down menu. Select
"Sharp Button Manager B" in "Send to this application" and click the
"Apply" button. Do the same for each ScanMenu through "SC6:".

When the settings have been completed, click the "OK" button to
close the screen.

Button Manager is now linked to the scan menu  (1 through 6).

The scan settings for each of scan menus 1 through 6 can be changed
with the setting window of Button Manager.

For the factory default settings of the scan menu. For the procedures
for configuring Button Manager settings, see "Button Manager Set-
tings" in the Online Manual.