AR-M620 (serv.man161). 031-Measures against misfeeding at POD1_N, due to breaking chipping of the upper fuser pawls and the drum pick off pawls. - Sharp Copying Equipment Technical Bulletin (repair manual). Page 8

Read Sharp AR-M620 (serv.man161) Technical Bulletin online

Sharp Electronics (UK) Ltd., Technical Services Group
ARE722
8.  Insert the separator pawl shaft in the reverse order, note that the separator pawl shaft
pick is to fitted face up.
9.  Remove the screw of the separator pawl waver bearing B and slide the separator
pawl waver bearing B to the front side.
 
10.  When the separator pawl waver bearing B has slid to the front face the separator
pawl shaft pick downwards.  Be sure to insert the boss portion of the separator pawl
pick to the in side of the separator pawl holder.
11.  Restore the separator pawl waver bearing B as before and secure with screw.
12. Assemble by following the procedure from No.1- No. 4 in reverse order.
Page of 8
Display

Download Sharp AR-M620 (serv.man161) Technical Bulletin