AR-M620 (serv.man170). 022-Adjustment required when the CIS unit or the CIS pwb is replaced. - Sharp Copying Equipment Technical Bulletin (repair manual)

ar-m620 (serv.man170) technical bulletin
Model
AR-M620 (serv.man170)
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
8.36 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / 022-Adjustment required when the CIS unit or the CIS pwb is replaced.
File
ar-m620-sm170.pdf
Date

Read Sharp AR-M620 (serv.man170) Technical Bulletin online

Sharp Electronics (UK) Ltd., Technical Services Group
ARE696
1.Model Name
ARM350/450, ARM350N/450N, ARM350U/450U, ARM300U, ARM300N,
ARM550/620/700U.
2.Description
(Cases when shading correction work for the CIS unit is required)
In the cases described below, shading correction for the CIS unit must be executed
through Simulation 63-2 (DSPF SHADING).
# When the CIS unit has been replaced
# When the CIS control PWB has been replaced
# When U2 trouble has occurred
# When the scanner control PWB (with EEPROM) has been replaced
# When the EEPROM of the scanner control PWB has been replaced
(Procedures)
1) Clean the CIS filter.
2) Clean the area around the RSPF mode reading section (glass).
3) Close the RSPF.
4) Enter Simulation 63-2 mode.
5) Select the DSPF SHADING mode.
6) Press the Start key.
The operation for shading correction is performed. When the operation has been
terminated normally, “SHADING COMPLETED” is displayed.
(Reason)
The shading correction data for the CIS unit is memorized in the EEPROM of the scanner
control PWB.
By executing shading correction through Simulation 63-2 (DSPF SHADING) on the
production line in the factory, the shading correction data is memorized in the EEPROM
of the scanner control PWB.
Since each CIS element has individual differences, the shading correction data suited to
each element is memorized at this time.
Unlike the CCD unit, the operation for shading correction with the CIS unit is performed
only through Simulation 63-2 (DSPF SHADING). After that, correction for each individual
CIS element is not performed, but an operation to correct the entire output level is
performed according to the degree of contamination.
Note : With the CCD unit, the operation for shading correction is performed automatically
when the machine is started up or every time it comes to the specified conditions.
Adjustment required when the CIS Unit or the CIS
PWB is replaced.
TECHNICAL BULLETIN
Date:
01 November 2004
Model: 
ARM350/450,
ARM350/450N,
ARM350/450U
ARM300U/ARM300N
ARM550/620/700U
Ref.:
022
Colour: 
White
Page:
1 of 1
Display

Download Sharp AR-M620 (serv.man170) Technical Bulletin

Here you can read online and download Sharp AR-M620 (serv.man170) Technical Bulletin in PDF. AR-M620 (serv.man170) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-M620 (serv.man170) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.