Read Sony HDR-PJ800 / HDR-PJ810 / HDR-PJ810E / HDR-PJ820 / HDR-PJ820E (serv.man2) Service Manual online
1-10
HDR-PJ800/PJ810/PJ810E/PJ820/PJ820E_L2
– ENGLISH –
(13) While attaching the four bosses and the shaft, install the Frame
(E-Sub-A), Frame (E-Sub-B), and Ball Bearing, and then tighten
six screws in the order shown in the figure below.
six screws in the order shown in the figure below.
Tightening torque = 0.18 ± 0.02N · m (1.8 ± 0.2kg f · cm)
TOP
FRONT
TO
P
FRONT
TO
P
FRONT
1
5
2
6
3
4
Screw
Screw
Screw
Screw
Screw
Screw
Bosses
Bosses
Frame (E-Sub-A),
Ball Bearing
Ball Bearing
Frame (E-Sub-B)
Shaft
(14) While pass the LF-2063 Flexible Board to the hole, and attaching
the two bosses and the shaft, install the Frame (E-Sub-A), Frame
(E-Sub-B), and Ball Bearing.
(E-Sub-B), and Ball Bearing.
TO
P
FRONT
LF-2063 Flexible Board
Hole
Bosses
Frame (F-Sub-A),
Frame (F-Sub-B),
Ball Bearing
Frame (F-Sub-B),
Ball Bearing
Shaft
(15) Stick the adhesive part of the LF-2063 Flexible Board while posi-
tioning it with the two bosses.
If the adhesive force is lowered, cut the Adhesive Sheet as shown
in the figure in the frame and then stick it.
in the figure in the frame and then stick it.
TO
P
FRONT
Adhesive part
Bosses
LF-2063 Flexible Board
LF-2063 Flexible Board
Shape and sticking position
of the Spacer Sheet (LE)
of the Spacer Sheet (LE)
Spacer Sheet (LE)
(16) While attaching the four bosses, install the Sheet Metal (C), Stopper.
TOP
FRONT
Sheet Metal (C),
Stopper
Stopper
Bosses
Bosses
(17) Stick the adhesive part of the LF-2026 Flexible Board while posi-
tioning it with the two bosses.
If the adhesive force is lowered, cut the Adhesive Sheet as shown
in the figure in the frame and then stick it.
in the figure in the frame and then stick it.
TO
P
FRONT
Adhesive part
Bosses
LF-2026 Flexible Board
LF-2026 Flexible Board
Shape and sticking position
of the Adhesive Sheet
of the Adhesive Sheet
Adhesive Sheet
(18) Stick the adhesive part of the LF-2025 Flexible Board while posi-
tioning it with the two bosses, and connect the connector.
If the adhesive force is lowered, cut the Adhesive Sheet as shown
in the figure in the frame and then stick it.
in the figure in the frame and then stick it.
TO
P
FRONT
Adhesive part
Connectors
Bosses
LF-2025 Flexible Board
LF-2025 Flexible Board
Shape and sticking position
of the Adhesive Sheet
of the Adhesive Sheet
Adhesive
Sheet
Sheet
(19) Tighten nine screws in the order shown in the figure below.
Tightening torque = 0.18 ± 0.02N · m (1.8 ± 0.2kg f · cm)
1
2
3
5
7
8
9
6
4
TO
P
TO
P
FR
ON
T
FRO
NT
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Click on the first or last page to see other HDR-PJ800 / HDR-PJ810 / HDR-PJ810E / HDR-PJ820 / HDR-PJ820E (serv.man2) service manuals if exist.