HDR-PJ800, HDR-PJ810, HDR-PJ810E, HDR-PJ820, HDR-PJ820E (serv.man2) - Sony Movie Service Manual (repair manual). Page 10

Read Sony HDR-PJ800 / HDR-PJ810 / HDR-PJ810E / HDR-PJ820 / HDR-PJ820E (serv.man2) Service Manual online

1-6
HDR-PJ800/PJ810/PJ810E/PJ820/PJ820E_L2
– ENGLISH –
1-9 . LENS DEVICE (LSV-1400B) REPLACING METHOD
Lens Cap
A protective Lens Cap is attached to each new 
service Lens Block.
Carry out replacement work with this Lens Cap 
attached.
Note:
Removal
(1)  Remove the five screws.
TOP
FRONT
Screw
Screw
Screw
Screw
Screw
(2)  Remove the four screws.
TO
P
FRONT
Screw
Screw
Screw
Screw
(3)  Disconnect the connector and peel off the adhesive part of the LF-
2025 Flexible Board.
TO
P
FRON
T
Adhesive part
Connector
LF-2025 Flexible Board
(4)  Peel off the adhesive part of the LF-2026 Flexible Board.
TO
P
FRONT
Adhesive part
LF-2026 Flexible Board
(5)  Remove the Sheet Metal (C), Stopper while detaching the four  bosses. 
TO
P
FRONT
Sheet Metal (C),
Stopper
Bosses
Bosses
(6)  Peel off the adhesive part of the LF-2063 Flexible Board.
T
OP
FR
ONT
Adhesive part
LF-2063 Flexible Board
(7)  Remove the Frame (F-Sub-A), Frame (F-Sub-B), and Ball Bearing 
while detaching the two bosses and the shaft.
TO
P
FRONT
Bosses
Frame (F-Sub-A),
Frame (F-Sub-B),
Ball Bearing
Shaft
(8) Remove the six screws and remove the Frame (E-Sub-A), Frame 
(E-Sub-B), and Ball Bearing while detaching the four bosses and 
the shaft.
TO
P
FR
ON
T
TO
P
FRONT
TO
P
FRO
NT
Screw
Screw
Screw
Screw
Screw
Screw
Bosses
Bosses
Frame (E-Sub-A),
Ball Bearing
Frame (E-Sub-B)
Shaft
Page of 39
Display

Click on the first or last page to see other HDR-PJ800 / HDR-PJ810 / HDR-PJ810E / HDR-PJ820 / HDR-PJ820E (serv.man2) service manuals if exist.