Read Sony HDR-PJ800 / HDR-PJ810 / HDR-PJ810E / HDR-PJ820 / HDR-PJ820E (serv.man2) Service Manual online
1-7
HDR-PJ800/PJ810/PJ810E/PJ820/PJ820E_L2
– ENGLISH –
(9) Disconnect the connector and remove the four screws to detach the
Sheet Metal (B), Stopper, Motor B, and LF-2025 Flexible Board.
TO
P
FRONT
TO
P
FRONT
Connector
Sheet Metal (B),
Stopper,
Motor B
LF-2025 Flexible Board
Stopper,
Motor B
LF-2025 Flexible Board
Screw
Screw
Screw
Screw
(10) Disconnect the connector and remove the three screws to detach
the Motor B.
Peel off the adhesive part of the LF-2025 Flexible Board.
Sheet Metal (B),
Stopper
Stopper
Adhesive part
Connector
Motor B
LF-2025 Flexible
Board
Board
Screw
Screw
Screw
(11) Remove the three screws while turning the Plate of the Motor A to
detach the Motor A.
TOP
FRONT
TO
P
FRONT
TO
P
FRONT
TO
P
FRONT
Screw
Screw
Screw
Screw
Screw
Screw
Plate of the Motor A
Plate of the Motor A
Plate of the Motor A
Motor A
(12) Remove the screw, and remove the boss and the claw to detach the
Front Ornament.
TO
P
FRONT
Boss
Claw
Screw
Front Ornament
(13) Peel off the CM Radiation Sheet.
TO
P
FRONT
CM Radiation Sheet
(14) Peel off the adhesive part of the LF-2026 Flexible Board.
TO
P
FRONT
Adhesive part
LF-2026 Flexible Board
(15) Remove the two screws and disconnect the connector to detach the
Sheet Metal (D-Sub), the LF-2026 Flexible Board.
TOP
FRONT
TOP
FRONT
Connector
Screw
Screw
Sheet Metal (D-Sub),
LF-2026 Flexible Board
LF-2026 Flexible Board
(16) Peel off the adhesive part of the LF-2026 Flexible Board.
Adhesive part
LF-2026 Flexible Board
Sheet Metal (D-Sub)
Click on the first or last page to see other HDR-PJ800 / HDR-PJ810 / HDR-PJ810E / HDR-PJ820 / HDR-PJ820E (serv.man2) service manuals if exist.