Read Sharp MX-M364N / MX-565N (serv.man4) Service Manual online
MX-M565N SIMULATION 5 – 6
50
12
Perform the scan image off-center position adjustment.
(The adjustment is made separately for each scan mode.)
(The adjustment is made separately for each scan mode.)
27
Adjust the image loss of a scan image in the FAX/scanner mode.
28
Perform the OC adjustment, main scan magnification ration correction, the SPF adjustment and the
print position adjustment.
print position adjustment.
51
1
Adjust the ON/OFF timing of the transfer voltage
2
Adjust the contact pressure (deflection amount) on paper by the main unit and the SPF resist roller.
Paper feed, paper reverse/transport
53
6
Used to adjust the detection level of the SPF document width.
7
Used to adjust the SPF document size width sensor.
Automatic document feeder
8
Used to adjust the document lead edge reference and the SPF mode document scan position.
Automatic document feeder
9
SPF dirt detection setting.
10
SPF dirt detection execution.
55
1
Set the specifications of the engine control operations. (SOFT SW)
2
Set the specifications of the scanner control operation. (SOFT SW)
3
Set the specifications of the controller operation. (SOFT SW)
56
1
Transport data between HDD - MFP PWB SRAM/EEPROM. (Used to repair the PWB.)
2
Backup the data in the EEPROM. SRAM, and HDD (including user authentication data and address
data) to the USB memory.
data) to the USB memory.
3
Backup the document filing data to the USB memory.
HDD
4
Backup the JOB log data to the USB memory.
HDD
5
Import the SIM22-6 data to the USB memory in the TEXT format.
6
Import the SIM23-2 data to the USB memory in the TEXT format.
7
Import SYSLOG data into the USB memory.
60
1
Check the operations (read/write) of the MFP PWB memory.
MFP (ICU) PWB
61
1
Check the LSU polygon motor rotation and laser detection.
LSU
3
Set the laser power
LSU
4
Print the print image skew adjustment pattern
11
Correct the laser power automatically
12
Laser power manual correction LSU.
13
Clear the laser power correction value.
62
1
Format HDD/SD card (HDD: excluding the operation manual and the watermark data) (SD card
user data).
user data).
HDD
2
Check read/write of the hard disk (partial).
HDD
3
Check read/write of the hard disk (all areas).
HDD
6
Perform the self diagnostics of the hard disk.
HDD
7
Print the hard disk self diagnostics error log.
HDD
8
Format the HDD/SD card (HDD: excluding the operation manual , watermark data and the system
area) (SD card: user data)
area) (SD card: user data)
HDD
10
Clear the job completion list .
HDD
11
Clear the document filing data.
HDD
12
Set Enable/Disable of auto format in a hard disk trouble.
HDD
13
Format the hard disk. (operation manual and watermark area only)
HDD
14
Delete the document filing management data.
20
Check the operation of the mirroring HDD.
Mirroring HDD
63
1
Used to display the shading correction result.
Scanner
2
Used to perform shading.
Scanner
3
Used to perform scanner (CCD) color balance and gamma auto adjustment.
Scanner
4
Used to display the SIT chart patch density.
Scanner
5
Used to perform the scanner (CCD) color balance and gamma default setting.
Scanner
11
Set the target color balance of the copy mode.
64
2
Test print. (Self print) (Monochrome mode)
4
Printer test print. (Self print)
* This simulation functions only for the machines which are provided with the printer function.
* This simulation functions only for the machines which are provided with the printer function.
5
Printer test print. (Self print) (PCL)
6
Printer test print. (Self print) (PS)
65
1
Adjust the touch panel (LCD display section) detection coordinates.
Operation unit
2
Display the touch panel (LCD display section) detection coordinates.
Operation unit
5
Check the operation panel key input.
Operation unit
67
17
Printer controller reset
24
Printer density adjustment (auto adjustment)
25
Printer density adjustment (Manual adjustment)
26
Set the target the halftone of the printer mode
31
Clear the printer calibration value (Half-tone process control data).
33
Set the gamma of the each printer screen.
34
Set the density correction in the printer high density section.
(Support for the high density section tone gap)
(Support for the high density section tone gap)
36
Adjust the density in the low density section.
45
Adjust the printer image filter.
52
Set the default of the gamma of the printer screen.
54
Printer engine halftone auto adjustment.
Main
Sub
Functions
Section
Click on the first or last page to see other MX-M364N / MX-565N (serv.man4) service manuals if exist.