MX-M364N, MX-565N (serv.man4). Service Manual (Revised January 2016). - Sharp Copying Equipment Service Manual (repair manual). Page 101

MX-M565N  SIMULATION  5 – 1

MX-M503N

Service Manual

 

The simulation mode has the following functions, to display the
machine operating status, identify the trouble position and causes
in an earlier stage, and make various setups and adjustments
speedily for improving the serviceability of the machine.

1)

Various adjustments

2)

Setting of the specifications and functions

3)

Canceling troubles

4)

Operation check

5)

Counters check, setting, clear

6)

Machine operating conditions (operation hysteresis), data
check, clear.

7)

Various (adjustments, setting, operation, counters, etc.) data
transport.

The operating procedures and displays depend on the design of
the operation panel of the machine.

MX-M364N/M464N/M564N series

* Entering the simulation mode

1)

Copy mode key ON -> Program key ON -> Asterisk (*) key ON
-> CLEAR key ON -> Asterisk (*) key ON -> Ready for input of
a main code of simulation

2)

Entering a main code with the 10-key -> START key ON.
Or select a main code with the SIM key on the touch panel.

3)

Entering a sub code with the 10-key -> START key ON.

4)

Select an item with the scroll key and the item key.

5)

The machine enters the mode corresponding to the selected
item. Press [START] key or [EXECUTE] key to start the simu-
lation operation.

When canceling the current simulation mode to change the
main code and the sub code, press [SYSTEM SETTINGS] key.

* Canceling the simulation mode to return to the normal mode

1)

Press [CA] key.

Do not turn OFF the power switch on the operation panel when the
machine is in the simulation mode. If the power switch should be
turned OFF in the simulation mode, a malfunction may be resulted.
In this case, turn OFF/ON the main power source.

MX-M365N/M465N/M565N series

1)

Double-click the [HOME] key. (Total use quantity/Toner
remaining quantity display mode screen)

2)

Touch the VER display section. (10-key mode input mode
screen)

3)

Touch the (#) key -> Asterisk (*) key -> Clear key -> 
Asterisk (*) key -> Ready for input of main code of simulation.

4)

Enter a main SIM code with the 10-key pad then touch the
START key or select a main code from the SIM key list on the
touch panel.

5)

Enter a sub code with the 10-key pad, then touch the START
key or select a sub code from the code list on the touch panel.

6)

Select an item with the scroll key and the item key.

7)

The machine enters the mode corresponding to the selected
item. Press [START] key or [EXECUTE] key to start the simu-
lation operation.

To cancel the current simulation mode and change the main
code and the sub code, press [BACK] key.

* Canceling the simulation mode to return to the normal mode

1)

Press [EXIT] key.

Do not turn OFF the power when the machine is in the simulation
mode. If the power switch should be turned OFF in the simulation
mode, a malfunction may be resulted. In this case, turn OFF/ON
the main power source.

Touch the [BACK] key.

[BACK] key

VER display sectio

Touch the VER display section.