MX-M364N, MX-565N (serv.man4). Service Manual (Revised January 2016). - Sharp Copying Equipment Service Manual (repair manual). Page 127

MX-M565N  SIMULATION  5 – 27

5: 200 sheets print Enable after toner near end

NOTE: When item B is set to "0" and item D to a desired number,

printing can be made after toner near end. However, insuf-
ficient density, thin spots, or improper color balance may be
resulted depending on the using conditions. When item D
is set to "1" printing is disabled after toner near end. this
case, toner end display is made in the toner near end sta-
tus, and copy/print/FAX outputs are disabled.

 

26-71

Setting

Set the trial mode of the web browsing
function.

1)

Enter the set value with 10-key.

2)

Press [OK] key.

 

26-73

Setting

Enlargement continuous shoot, A3 wide
copy mode image loss (shade delete quan-
tity) adjustment.

1)

Select an item to be set with scroll key.

2)

Enter the set value with 10-key.

3)

Press [OK] key.

When the adjustment value is increased, the image loss
(shade delete quantity) is increased.

 

26-74

Setting

Set the OSA trial mode.

1)

Enter the set value with 10-key.

2)

Press [OK] key.

 

26-78

Setting

Set the password of the remote operation
panel mode.

1)

Enter a password with 10-key. (5 - 8 digits)

The entered password is displayed on the column of "NEW”.

In order to correct the entered password, press the [clear] key
to delete the entered value one digit by one digit.

2)

Press [SET] key.

 

26-79

Setting

Set YES/NO of the popup display of user
data delete result.

1)

Enter the set value with 10-key.

2)

Press [OK] key.

 

 

27-1

Setting

Set non-detection of communication error
(U7-00) with RIC. (FSS function)

1)

Enter the set value with 10-key.

2)

Press [OK] key.

The set value in step 1) is saved.

A

WEB 
BROWSING 
TRIAL MODE

0

Web browsing trial 
mode setting

0 - 1

1

1

Web browsing trial 
mode canceling

A

DELETING 
SHADOW ADJ 
(M)

Rear frame side 
image loss quantity 
(shade delete 
quantity) adjustment

0 - 50

0 

(Adjustment 

amount: 

0.1mm/step)

B

DELETING 
SHADOW ADJ 
(S)

Lead edge image 
loss quantity (shade 
delete quantity) 
adjustment

0 - 50

0 

(Adjustment 

amount: 

0.1mm/step)

A

OSA TRIAL 
MODE 
(0: YES 1: NO)

0

Used to set the 
OSA trial mode.

0 - 1

1

1

OSA trial mode is 
canceled.

A

DISP SET

0

User data delete 
result popup display 
OFF

0 - 1

0

1

User data delete 
result popup display 
ON

0

Not detection

1

Detection