Read Sharp MX-M266N / MX-M316N / MX-M356N (serv.man5) Service Manual online
MX-M265N MX-FN26 (FINISHER) 7 – 2
4)
Remove the actuator.
5) Remove the screw which are fixing the paper exit tray.
Remove the paper exit tray.
6)
Remove the paper exit rear cabinet support plate.
7) Remove the screws, and remove the front cabinet left.
8)
Remove the paper exit dummy cover.
9)
Remove the screw and remove the rear cabinet.
10) Remove the right cabinet middle unit.
11) Pass the harness (packed together with the unit) of the second
paper exit unit though the cable saddle and inside of the frame
plate as shown in the figure.
plate as shown in the figure.
Install the second paper exit unit to the machine, and fix it with
the M4 screws which are packed together with the finisher.
Connect the connector of the harness.
the M4 screws which are packed together with the finisher.
Connect the connector of the harness.
2
: ‘15/Aug.
2
2
2
2
2
2
2
Click on the first or last page to see other MX-M266N / MX-M316N / MX-M356N (serv.man5) service manuals if exist.