Read Sharp MX-M266N / MX-M316N / MX-M356N (serv.man5) Service Manual online
MX-M265N MX-FN26 (FINISHER) 7 – 4
18) After attaching the screw, pull the connection plate toward you.
MEMO: When holding the finisher, hold the front frame side
and the rear frame side.
and the rear frame side.
19) Insert the finisher along the connection plate rail from the left
side of the machine until it locks.
20)Press the finisher from the front to slide to the rear together with
the connection plate.
MEMO: Press the right side of the connection plate.
21) Fix the connection plate from the front with the M3 screw which
are packed with the finisher.
22) Install the finisher connection cabinet from the left. And, install
the finisher front cabinet lower with screw.
23)Fix the FIN transmission harness with the bundled hexagonal
screws.
2
: ‘15/Aug.
2
2
Click on the first or last page to see other MX-M266N / MX-M316N / MX-M356N (serv.man5) service manuals if exist.