Read Sharp MX-M266N / MX-M316N / MX-M356N (serv.man5) Service Manual online
MX-M265N MX-FN26 (FINISHER) 7 – 1
MX-M265N
Service Manual
[7] MX-FN26 (FINISHER)
1. Unpacking
MEMO: When removing the finisher, put your hand beneath the
unit and lift it up as shown below.
unit and lift it up as shown below.
Check to confirm that all the packed parts are provided.
2. Installation
NOTE: Turn off the main switch of the machine and then remove
the power plug of the machine from the outlet.
1)
Open the front cover.
2)
Remove the screws, and remove the left cabinet.
3)
Remove the paper holding arm.
The paper holding arm must be removed together with the
paper holding arm holder. Since the paper holding arm is easy
to remove alone, be careful not to leave the paper holding arm
holder unremoved.
The paper holding arm must be removed together with the
paper holding arm holder. Since the paper holding arm is easy
to remove alone, be careful not to leave the paper holding arm
holder unremoved.
FIN connection unit
FIN front cover
Second paper exit unit
Paper holding arm
M3 x 8 S tight bind
(4 pcs.)
M4 x 8 S tight bind
(2 pcs.)
Resin grip
Staple position label
Earth cable fixing
screw
M3 x 8 S tight bind
screw
M3 x 8 S tight bind
(1 pcs.)
Hexagonal screw
(2 pcs.)
Second paper exit
right door unit
right door unit
FIN transmission
harness
harness
2
: ‘15/Aug.
2
2
Click on the first or last page to see other MX-M266N / MX-M316N / MX-M356N (serv.man5) service manuals if exist.