MX-M266N, MX-M316N, MX-M356N (serv.man5). Installation Manual (Revised December 2016). - Sharp Copying Equipment Service Manual (repair manual)

Model
MX-M266N MX-M316N MX-M356N (serv.man5)
Pages
74
Size
26.04 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Installation Manual (Revised December 2016).
File
mx-m266n-mx-m316n-mx-m356n-sm5.pdf
Date

View Sharp MX-M266N / MX-M316N / MX-M356N (serv.man5) Service Manual online

Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
INSTALLATION MANUAL
Transit, Installation (using) environment, Note
[1] CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . .1-1
[2] MX-M265N/M315N/M266N/M316N/M356N/M265U/
M315U/M356U/M266N A/M316N A/M356N A/M265NE/
       M315NE (MAIN UNIT)  . . . . . . . . . . . . . . . . . . . . . . .2-1
[3] MX-RP19/RP20 
(REVERSING SINGLE PASS FEEDER)  . . . . . . . . .3-1
[4] MX-CS12/CS13(500-SHEET PAPER TRAY) . . . . . .4-1
[5] AR-DS19/DS20 (LOW STAND/HIGH STAND) . . . . .5-1
[6] IC card reader. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-1
[7] MX-FN26 (FINISHER)  . . . . . . . . . . . . . . . . . . . . . . .7-1
[8] MX-TR17 (EXIT TRAY UNIT) . . . . . . . . . . . . . . . . . .8-1
[9] MX-TR18 (JOB SEPARATOR) . . . . . . . . . . . . . . . . .9-1
[10] MX-PB16 (PRINTER EXPANSION KIT). . . . . . . . .10-1
[11] MX-PK11 (PS3 EXPANSION KIT)  . . . . . . . . . . . . . 11-1
[12] MX-PF10 (BARCODE FONT KIT)  . . . . . . . . . . . . .12-1
[13] MX-NSX1 
(NETWORK SCANNER EXPANSION KIT)  . . . . . .13-1
[14] MX-FX11 (FACSIMILE EXPANSION KIT)  . . . . . . .14-1
[15] MX-FWX1 (INTERNET FAX EXPANSION KIT) . . .15-1
[16] AR-SU1 (STAMP UNIT) . . . . . . . . . . . . . . . . . . . . .16-1
[17] MX-FR48U/FR50U (DATA SECURITY KIT) . . . . . .17-1
[18] MX-AMX1 
(APPLICATION INTEGRATION MODULE)  . . . . . .18-1
[19] MX-AMX2 
(APPLICATION COMMUNICATION MODULE) . . .19-1
[20] MX-AMX3 (EXTERNAL ACCOUNT MODULE) . . .20-1
[21] MX-HD14/HD15 (HARD DISK EXPANSION KIT)  . 21-1
[22] MX-EB13 (USB WIRELESS LAN ADAPTER) . . . . 22-1
[23] Dehumidifying heater kit. . . . . . . . . . . . . . . . . . . . . 23-1
[24] Remote operation panel function Enable setting . . 24-1
[25] Setting, Adjustments, Operation check  . . . . . . . . . 25-1
[26] Setup and adjustment data recording  . . . . . . . . . . 26-1
[27] Necessary works before moving the machine . . . . 27-1
CODE: 00ZMXM316/I6E
CONTENTS
DIGITAL MULTIFUNCTIONAL SYSTEM
MX-M356N/M356U/
MX- M266N/M316N/M265N/M315N
MX-M265U/M315U
MX-M266N A/M316N A/M356N A
MX-M265NE/M315NE
MODEL
2
: ‘15/Aug.
2
2
2
2
2
3
: ‘16/Jun.
3
3
CONTENTS
1
Transit, Installation (using) environment, Note
1. Installing (use) conditions . . . . . . . . . . . . . . . . . . .
 . . . . . . i
2. Transit and delivery. . . . . . . . . . . . . . . . . . . . . . . .
 . . . . . . ii
[1] CONFIGURATION
1. N Model  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 - 1
2. U Model  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 - 2
3. Option list  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 - 3
[2] MX-M266N/M316N/M265N/M315N/M356N/M265U/M315U/
M356U/M266N A/M316N A/M356N A/M265NE/ M315NE 
(MAIN UNIT)
1. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 - 1
2. Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 - 2
[3] MX-RP19/RP20 (REVERSING SINGLE PASS FEEDER)
1. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 - 1
2. Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 - 1
[4] MX-CS12/CS13 (500-SHEET PAPER TRAY)
1. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 - 1
2. Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 - 2
[5] AR-DS19/DS20 (LOW STAND/HIGH STAND)
1. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 - 1
2. Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 - 1
[6] IC card reader
1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 - 1
2. Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 - 1
3. Setting file for HID card reading . . . . . . . . . . . . . .
6 - 4
[7] MX-FN26(FINISHER)
1. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 - 1
2. Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 - 1
[8] MX-TR17 (EXIT TRAY UNIT)
1. Packed items  . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 - 1
2. Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 - 1
[9] MX-TR18 (JOB SEPARATOR)
1. Packed items  . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9 - 1
2. Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9 - 1
[10] MX-PB16 (PRINTER EXPANSION KIT)
1. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 1
2. Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 1
[11] MX-PK11 (PS3 EXPANSION KIT)
1. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 1
2. Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 1
[12] MX-PF10 (BARCODE FONT KIT)
1. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12- 1
2. Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12- 1
[13] MX-NSX1 (NETWORK SCANNER EXPANSION KIT)
1. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13- 1
2. Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13- 1
[14] MX-FX11 (FACSIMILE EXPANSION KIT)
1. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14- 1
2. Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14- 1
[15] MX-FWX1 (INTERNET FAX EXPANSION KIT)
1. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15- 1
2. Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15- 1
[16] AR-SU1 (STAMP UNIT)
1. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16- 1
2. Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16- 1
[17] MX-FR48U/FR50U (DATA SECURITY KIT)
1. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17- 1
2. Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17- 1
[18] MX-AMX1 (APPLICATION INTEGRATION MODULE)
1. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18- 1
2. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18- 1
[19] MX-AMX2 (APPLICATION COMMUNICATION MODULE)
1. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19- 1
2. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19- 1
[20] MX-AMX3 (EXTERNAL ACCOUNT MODULE)
1. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20- 1
2. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20- 1
[21] MX-HD14/HD15 (HARD DISK EXPANSION KIT)
1. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21- 1
2. User data backup  . . . . . . . . . . . . . . . . . . . . . . . . . 21- 1
3. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21- 1
4. User data restore . . . . . . . . . . . . . . . . . . . . . . . . . . 21- 4
5. Rear cabinet attachment . . . . . . . . . . . . . . . . . . . . 21- 4
6. Operation check  . . . . . . . . . . . . . . . . . . . . . . . . . . 21- 4
[22] MX-EB13 (USB WIRELESS LAN ADAPTER)
1. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22- 1
2. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22- 1
3. Change system setting  . . . . . . . . . . . . . . . . . . . . . 22- 1
[23] Dehumidifying heater kit
1. Parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23- 1
2. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23- 2
[24] Remote operation panel function Enable setting
1. General  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24- 1
2. Remote operation panel function password setting 
procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24- 1
[25] Setting, Adjustments, Operation check
1. Firmware version check and version up  . . . . . . . . 25- 1
2. Function and operation check . . . . . . . . . . . . . . . . 25- 1
[26] Setup and adjustment data recording  . . . . . . . . . . . 26- 1
[27] Necessary works before moving the machine  . . . . 27- 1
1
: ‘15/May
2
: ‘15/Aug.
2
2
2
2
3
: ‘16/Jun.
3
Symbols in this manual
The lists of symbols used in this manual are shown below.
The meaning of each symbol described in the table must be understood for proper servicing.
1. Symbols used for notes and 
cautions
2. Symbols used in the work 
contents
Symbol
Meaning
CAUTION
Indicates a general 
caution item.
HIGH TEMP
Be careful of a high 
temperature in the 
fusing section.
HIGH VOLTAGE
Be careful of an electric 
shock where a high 
voltage is applied such 
as the high voltage 
PWB, the main charger, 
and the process section.
DANGER
Indicates danger.
HANDLE WITH 
CARE
Indicates a part which 
requires special care for 
handling such as the 
HDD, and the LSU.
INHIBIT
Indicates inhibit.
NO 
ELECTROSTATIC
CHARGE 
Be careful to keep away 
from static electricity.  
(PWB's and electric 
parts)
NO DUST, 
FINGER PRINT, 
DIRT, SCRATCH
Be careful not to touch 
directly, such as the 
optical section, the 
photoconductor, and the 
DV roller. 
Also be careful not to 
scratch. 
NO SCRATCH
NO LIGHT
Be careful not to expose 
to light, such as the 
photoconductor, and the 
test chart.
NO SOLVENT
Be careful not to use a 
solvent in cleaning, etc.
NO DISASSEMLE
Do not disassemble. 
Not serviceable. 
Example CCD unit.
OK/GOOD
Indicates a correct 
procedure or result in an 
adjustment, etc.
NO GOOD
Indicates a wrong 
procedure or result in an 
adjustment, etc.
NOTE
Indicates a note.
IMPORTANT
Indicates an important 
item. 
REFER
Indicates a reference 
page, etc. 
NEW
Indicates a new 
technology, a new 
method, or a new item.
EXAMPLE
Indicates a description 
using an example.
Symbol
Meaning (Work content)
Adhesion
Indicates that a seal, etc. 
is attached.
Adjustment
Indicates an adjustment.
Measure a 
dimension or a 
size.
Indicates that a 
dimension or a length is 
measured.
Apply grease
Indicates that grease is 
to be applied.
Apply conductive 
grease
Indicates conductive 
grease is applied.
Cleaning 
(Dry)
Indicates clean with a 
dry cloth.
Cleaning 
(Wet)
Indicates clean with a  
cloth dampened with 
water.
Cleaning 
(Alcohol)
Indicates clean with 
alcohol.
Cleaning 
(Blower)
Indicates cleaning is 
done with a blower/
brush.
Symbol
Meaning
3. Symbols used for kinds of parts
4. Symbols used for additional 
descriptions
Cleaning 
(Vacuum)
Indicates that cleaning is 
performed with a 
vacuum cleaner.
Cleaning 
(Brush)
Indicates that cleaning is 
performed with a brush.
Oil
Indicates that oil is 
applied to lubricate.
Apply powder.
Indicates that setting 
power is applied to the 
photoconductor drum, 
the transfer belt, etc.
Replace
Indicates that a part is 
replaced.
Check
Indicates that a check 
(replacement, 
adjustment, cleaning) is 
performed.
Cut
Indicates that cutting is 
performed.
Loosen
Indicates that a screw is 
loosened.
Connect
Indicates that a 
connector is connected.
Disconnect
Indicates that a 
connector is 
disconnected.
Remove a 
harness.
Indicates that a harness 
is unsecured.
Attach a harness.
Indicates that a harness 
is secured.
Remove a clamp.
Attach a clamp.
Release a hook.
Indicates that a hook is 
released.
Fix a hook. 
Indicates that a hook is 
fixed.
Disengage the 
pawl.
Symbol
Meaning (Work content)
Engage the pawl.
Screw lock
Indicates that a screw is 
secured with adhesive.
Unlock
Turn OFF the 
power.
Disconnect the 
power plug.
Symbol
Meaning (Kinds of parts)
Maintenance 
part
Indicates a part which is 
replaced in a maintenance 
procedure.
Consumable 
part
Indicates a consumable 
part such as a 
photoconductor, 
developer, a transfer belt, 
etc.
Waste part
Indicates a waste part 
which is consumed but 
excluded from the above 
consumable parts. (A 
roller, a seal, etc.)
Unit part
Indicates a part which is 
designated as a unit.
Included part
Indicates a part which is 
included in the package
Symbol
Meaning
View from the 
top
Indicates from which 
angle the drawing is 
viewed.
View from the 
bottom
View from the 
front
View from the 
back
Symbol
Meaning (Work content)
MX-265N  Transit, Installation (using) environment, Note   - i
MX-265N
Service Manual
 
Transit, Installation (using) environment, Note
* About a main unit illustration, it may differ from a target model.
1.  Installing (use) conditions
Before installing the machine, check that the following installing
(use) conditions are satisfied.
If the installing (use) conditions are not satisfied, the machine may
not display full performances, resulting in troubles. It may also
cause safety problems. Therefore, be sure to arrange the installing
(use) conditions before setting up the machine.
A. Transportation space
For installation of a large size machine, be sure to check that the
door size is wide enough before bringing in.
B. Installing space
The following space must be provided around the machine in order
to assure machine performances and proper operations.
If any option is installed, provide the additional space for installing
it.
Adequate space must be provide behind the machine for proper
ventilation heat and dust. If not, the machine cannot exhibit func-
tions against heat and dust, causing some troubles.
C. Power source (Capacity, voltage, frequency, 
safety, plug)
If the power specifications are not satisfied, the machine cannot
exhibit full performances and may cause safety trouble.
Strictly observe the following specifications.
(1)
Power capacity
Check that the following power capacity is satisfied. If not, addition-
ally provide a power source.
Current capacity
Japan: 20A or more
EX 100V: 15A or more
EX 200V: 10A or more
NOTE: Check the shape of the power plug of the machine, and
insert it into a power outlet of the acceptable shape.
(2)
Power voltage
Measure the voltage during copying to check that the voltage is in
the range of the specified voltage 
If the voltage is outside the specified range, please have a certified
electrician upgrade the outlet.
(An electrical work is required.)
Use of a step-up transformer is also available. In this case, the
capacity must be great enough for the max. power consumption of
the machine.
(3)
Power frequency, waveform
The frequency must be within the range of the specified frequency
(4)
Safety
Be sure to properly ground the machine.
Grounding (earth connection) must be performed before inserting
the power plug into the power outlet.
When disconnecting the earth connection, be sure to disconnect
the power plug from the power outlet in advance.
(5)
Power plug
Check the shape of the power plug of the machine, and insert it into
a power outlet of the acceptable shape.
Power plug stated in power capacity.
D. Floor strength and level
This machine is considerably heavy and becomes heavier with an
option installed.
The floor must be strong enough to safely support the weight of the
machine as well as any installed options.
If the unit is not horizontally installed, the toner density control is not
performed normally, degrading the copy quality.
If not, color shift or image distortion may occur.
To assure proper Image quality, make sure the machine is setting
level.
E. Direct rays of the sun, dust, temperature, 
humidity, gasses, chemicals, vibration
(1)
Temperature and humidity (Environmental 
conditions)
This machine is designed to perform properly under the specified
temperature and humidity. If the temperature and humidity exceeds
the specified range, the machine may not operate properly and or
cause equipment failure.
Especially when the humidity is too high, paper absorbs humidity to
cause a paper jam or dirty copy.
Do not install the machine near a heater, a cooler, or a humidifier.
Condensation may form inside the machine causing multiple trou-
bles. Use enough care for ventilation.
Operational environment
Temperature: 10 to 35
Humidity: 20 to 85% RH
Atmospheric pressure: 590 to 1013hPa (altitude: 0 to 2000 m)
(2)
Contaminates
If dust enters the machine, it may cause dirty copy and a paper
jam, resulting in a shortened lifetime.
(3)
Direct sunlight
If the machine is installed under the rays of the sun, the exterior of
the machine may be discolored and abnormal copies may be pro-
duced.
(4)
Gases and chemicals
Do not install the machine at a place where there are gases and
chemicals. Especially be careful to avoid installation near a diazo-
type copier, which produces ammonium gas.
Copy quality may be adversely affected and a trouble may be
caused.
(5)
Vibration
Avoid installation near a machine which produces vibrations.
If vibrations are applied to the copier machine, copy images may be
deflected and a trouble may be caused.
No.
Content
1
Transportation space
2
Installing space
3
Power source (Capacity, fluctuation, safety)
4
Floor strength
5
Direct rays of the sun, dust, temperature, humidity, gases, 
chemicals
11-13/16" 
(30cm)
11-13/16" 
(30cm)
17-23/32" 
(45cm)
MX-265N  Transit, Installation (using) environment, Note   - ii
F. Note for handling PWB and electronic parts
When handling the PWB and the electronic parts, be sure to
observe the following precautions in order to prevent against dam-
age by static electricity.
• When in transit or storing, put the parts in an anti-static bag or an
anti-static case and do not touch them with bare hands.
• When and after removing the parts from an anti-static bag (case),
use an earth band as shown below:
• Put an earth band to your arm, and connect it to the machine.
• When repairing or replacing an electronic part, perform the
procedure on an anti-static mat.
G. Note for proper drum, developing and fusing 
unit handling
When handling the OPC drum and developing units, observe the
following items.
Drum unit
• To prevent  damage to the OPC drum, avoid working on the drum
unit in high intensity light areas.
• When the OPC drum is removed from the machine, cover it with
light blocking material. (When using paper, use about 10 sheets
of paper to cover it.)
• Be careful not to attach fingerprints, oil, grease, or other foreign
material on the OPC drum surface.
Developing unit
• Be careful not to "leave” fingerprints, oil, grease, or other foreign
material on the developing unit.
Fusing unit
• Be careful not to "leave” fingerprints, oil, grease, or other foreign
material on the fusing roller.
If these items are neglected, a trouble may be generated in the
copy and print image quality.
2.  Transit and delivery
A. Implements, facility, and manpower
It is recommendable to use a forklift for bringing in the machine for
safety.
If no forklift is available, man-power of two persons is required. The
machine is considerably heavy, and requires safety precautions for
delivery and installation.
Transit of the machine must be made in packed condition to the
installing place.
Use care not to exert vibrations or shocks to the machine when in
transit.
B. Delivery
Remove the packing materials prior to installation in the office envi-
ronment.
No.
Content
Method
1
Implements, facility, 
and man power
Use a forklift. (If no forklift is available, 
manpower of two persons is required.) 
2
Delivery
Transit must be made in packed condition.
  CONFIGURATION  1 – 1
Service Manual
 
[1] CONFIGURATION
A. N model
MX-M316N/M266N/M315N/M356N
DIGITAL MULTIFUNCTIONAL
SYSTEM
MX-M265N/M265NE
DIGITAL MULTIFUNCTIONAL
SYSTEM
MX-TR18
JOB SEPARATOR
MX-FN26
FINISHER
MX-CS12
500 SHEET PAPER TRAY
MX-CS13
500 SHEET PAPER TRAY
MX-TR17
EXIT TRAY UNIT
MX-CS12
500 SHEET PAPER TRAY
AR-DS20
LOW STAND
AR-DS19
HIGH STAND
MX-HD14
HARD DISK EXPANSION KIT
MX-PK11
PS3 EXPANSION KIT
MX-PF10
BARCODE FONT KIT
MX-FX11
FACSIMILE EXPANSION
KIT
AR-SU1
STAMP UNIT
MX-FR48U
DATA SECURITY KIT
MX-FWX1
INTERNET FAX EXPANSION
KIT 
MX-USX1
SHARPDESK 1 LICENSE
KIT
MX-USX5
SHARPDESK 5 LICENSE
KIT
MX-US10
SHARPDESK 10 LICENSE
KIT
MX-US50
SHARPDESK 50 LICENSE
KIT
MX-USA0
SHARPDESK 100 LICENSE
KIT
MX-AMX1
APPLICATION
INTEGRATION MODULE
MX-AMX2
APPLICATION
COMMUNICATION MODULE
MX-AMX3
EXTERNAL ACCOUNT
MODULE 
MX-EB13
USB WIRELESS LAN 
ADAPTER
MX-M316N/M266N/M315N
/M265N
MX-M316N/M266N/M315N
/M265N
MX-HD15
HARD DISK EXPANSION KIT
MX-M356N
MX-FR50U
DATA SECURITY KIT
MX-M356N
MX-M316N
 A/M266N A/M356N A
MX-M315NE
MX-M316N/M266N/M315N/
M265N/MX-M316N
 A/M266N A/
M356N A/M315NE/M265NE
MX-M316N/M266N/M315N/
M265N/MX-M316N
 A/M266N A/
M356N A
MX-
M315NE/M265NE
2
: ‘15/Aug.
2
3
: ‘16/Jun.
3
  CONFIGURATION  1 – 2
B. U model
MX-M315U
DIGITAL MULTIFUNCTIONAL
SYSTEM
MX-M356U
DIGITAL MULTIFUNCTIONAL
SYSTEM
MX-M265U
DIGITAL MULTIFUNCTIONAL
SYSTEM
MX-TR18
JOB SEPARATOR
MX-FN26
FINISHER
MX-CS12
500 SHEET PAPER TRAY
MX-CS13
500 SHEET PAPER TRAY
MX-TR17
EXIT TRAY UNIT
MX-CS12
500 SHEET PAPER TRAY
AR-DS20
LOW STAND
AR-DS19
HIGH STAND
MX-RP19
REVERSING SINGLE PASS
FEEDER
MX-RP20
REVERSING SINGLE PASS
FEEDER
MX-VR12
DOCUMENT COVER
MX-NSX1
NETWORK SCANNER
EXPANSION KIT
MX-FX11
FACSIMILE EXPANSION
KIT
MX-FWX1
INTERNET FAX EXPANSION
KIT 
MX-FR48U
DATA SECURITY KIT
MX-PB16
PRINTER EXPANSION KIT
MX-PK11
PS3 EXPANSION KIT
MX-PF10
BARCODE FONT KIT
AR-SU1
STAMP UNIT
MX-USX5
SHARPDESK 5 LICENSE
KIT
MX-AMX1
APPLICATION
INTEGRATION MODULE
MX-AMX2
APPLICATION
COMMUNICATION MODULE
MX-AMX3
EXTERNAL ACCOUNT
MODULE 
MX-HD14
HARD DISK EXPANSION KIT
MX-EB13
USB WIRELESS LAN 
ADAPTER
MX-USX1
SHARPDESK 1 LICENSE
KIT
MX-US10
SHARPDESK 10 LICENSE
KIT
MX-US50
SHARPDESK 50 LICENSE
KIT
MX-USA0
SHARPDESK 100 LICENSE
KIT
MX-M315U/M265U
MX-M315U/M265U
MX-FR50U
DATA SECURITY KIT
MX-M356U/M315U/M265U
MX-HD15
HARD DISK EXPANSION KIT
MX-M356U/M315U/M265U
2
: ‘15/Aug.
2
3
: ‘16/Jun.
3
  CONFIGURATION  1 – 3
1. Option list
—: Connection not allowed
STD: Equipped as standard
OPT: Installable option
*1: Need Inner Finisher (Cannot install together with Job Separator).
*2: Cannot install together with Paper Exit Tray Unit/Inner Finisher.
*3: Cannot install together with Job Separator.
*4: Need MX-PB16.
*5: Need HDD.
*6: Available for limited destination.
*7: This model will be integrated to FR50U from April, 2016.
*8: Middle East only. (This is only for the limited models. Regarding
the details of this machine, refer to SMEF.
      All models except the above models have been discontinued
since December, 2015.
*9: All destinations except Middle east
N model
U model
Model 
name
Name
MX-
M356N
MX-
M316N
MX-
M266N
MX-
M265N
MX-
M315N
MX-
M356U
MX-
M265U
MX-
M315U
Document 
feeder
MX-RP20
REVERSING SINGLE PASS 
FEEDER
STD
STD
STD
OPT
MX-RP19
REVERSING SINGLE PASS 
FEEDER
STD
STD
OPT
OPT
MX-VR12
DOCUMENT COVER
OPT
OPT
OPT
Paper Feeder
MX-CS12
500-SHEET PAPER 
TRAY
2nd 
Drawer
STD
STD
STD
OPT
STD
STD
OPT
STD
4th 
Drawer
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
MX-CS13
3rd 
Drawer
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
Stand
AR-DS20
LOW STAND
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
AR-DS19
HIGH STAND
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
Paper Exit 
Device
MX-TR17*1
EXIT TRAY UNIT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
MX-TR18*2
JOB SEPARATOR
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
MX-FN26*3
FINISHER
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
Printer
MX-PB16
PRINTER EXPANSION KIT
STD
STD
STD
STD
STD
OPT
OPT
OPT
MX-PK11
PS3 EXPANSION KIT
OPT
OPT
OPT
OPT
OPT
OPT*4
OPT*4
OPT*4
MX-PF10
BARCODE FONT KIT
OPT
OPT
OPT
OPT
OPT
OPT*4
OPT*4
OPT*4
Image Send
MX-NSX1
NETWORK SCANNER 
EXPANSION KIT
STD
STD
STD
STD
STD
OPT
OPT
OPT
MX-FX11
FACSIMILE EXPANSION KIT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
MX-FWX1
INTERNET FAX EXPANSION KIT
OPT*5
OPT*5
OPT*5
OPT*5
OPT*5
OPT*5
OPT*5
OPT*5
AR-SU1
STAMP UNIT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
Authentication 
/Security
MX-FR48U
DATA SECURITY KIT
OPT*7
OPT*7
OPT*7
OPT*7
OPT*7
OPT*7
MX-FR50U
DATA SECURITY KIT
OPT
OPT*7
OPT*7
OPT*7
OPT*7
OPT
OPT*7
OPT*7
Application
MX-USX1
SHARPDESK 1 LICENSE KIT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
MX-USX5
SHARPDESK 5 LICENSE KIT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
MX-US10
SHARPDESK 10 LICENSE KIT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
MX-US50
SHARPDESK 50 LICENSE KIT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
MX-USA0
SHARPDESK 100 LICENSE KIT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
MX-AMX1
APPLICATION INTEGRATION 
MODULE
OPT*5
OPT*5
OPT*5
OPT*5
OPT*5
OPT*5
OPT*5
OPT*5
MX-AMX2
APPLICATION 
COMMUNICATION MODULE
OPT*5
OPT*5
OPT*5
OPT*5
OPT*5
OPT*5
OPT*5
OPT*5
MX-AMX3
EXTERNAL ACCOUNT 
MODULE
OPT*5
OPT*5
OPT*5
OPT*5
OPT*5
OPT*5
OPT*5
OPT*5
Other
MX-HD14
HARD DISK EXPANSION KIT
OPT*8
OPT*8
OPT*8
OPT*8
OPT*8
OPT*8
MX-HD15
HARD DISK EXPANSION KIT
OPT
OPT*9
OPT*9
OPT*9
OPT*9
OPT
OPT*9
OPT*9
MX-EB13*6
USB WIRELESS LAN ADAPTER
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
2
: ‘15/Aug.
2
3
: ‘16/Mar.
3
3
3
3
3
3
  MX-M266N/M316N/M265N/M315N/M356N/M265U/M315U/M356U MX-M266N A/M316N A/M356N A/M265NE/M315NE(MAIN UNIT)  2 – 1
Service Manual
 
[2] MX-M266N/M316N/M265N/M315N/M356N/M265U/M315U/M356U           
MX-M266N A/M316N A/M356N A/M265NE/M315NE(MAIN UNIT)
1.  Unpacking
A. Unpacking
B. Fixing tape and protection material removal
C. Packed items check
D. Lock release
(1)
Tray rotation plate lock release
1)
Gently pull out the tray.
No.
Name
Quantity
1
Operation manual
1
2
FAX fixing step screw   (For MX-FX11)
1
1
2
2
: ‘15/Aug.
2
3
: ‘16/Jun.
3
4
: ‘16/Sep.
.
4
4

Download Sharp MX-M266N / MX-M316N / MX-M356N (serv.man5) Service Manual (Repair Manual)

Here you can view online and download Sharp MX-M266N / MX-M316N / MX-M356N (serv.man5) Service Manual in PDF. MX-M266N / MX-M316N / MX-M356N (serv.man5) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp MX-M266N / MX-M316N / MX-M356N (serv.man5) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.