Read Sharp MX-M266N / MX-M316N / MX-M356N (serv.man5) Service Manual online
IC card reader 6 – 3
C. Connect the connector of the IC card reader to
the connector of the machine
1)
Connect the connector of the IC card reader to the connector
of the machine
of the machine
2)
Fix the operation panel cabinet left.
D. Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
and turn ON the main power switch and the operation panel
power switch.
E. System setting modification
IC card reader device registration
1)
Device registration
a)
Enter the card reader setting menu as shown below.
System Settings -> Administrator Login -> User Control ->
Card Setting -> Card Reader Device Registration
Card Setting -> Card Reader Device Registration
b)
Press [Read] button.
c)
Disconnect the connector which links the machine and the
IC card reader, and then insert it back.
IC card reader, and then insert it back.
d)
Press [OK] button.
e)
Check to confirm that values are displayed on "Product
ID" and "Vender ID".
ID" and "Vender ID".
f)
Press [OK] button, and check to confirm that the success
dialog message is displayed.
dialog message is displayed.
2)
Setting
a)
Enter the card reader setting menu as shown below.
System Settings -> Administrator Login -> User Control ->
Card Type/Card Reade Setting
Card Type/Card Reade Setting
b)
Check-mark "Use IC Card for Authentication".
c)
Press [OK] button.
F. IC card recognition check
MEMO: There are two check methods of IC card recognition. Use
either one to check that the IC card reader is recognized.
either one to check that the IC card reader is recognized.
Check method 1
1)
Enter the card reader setting menu as shown below.
System Settings -> USB-Device Check
2)
Check to confirm that "Card Reader/Writer" is displayed.
Check method 2
Check to confirm that the icon of the card reader is displayed on the
system area of the home screen.
(If there is no check-mark on "Use IC Card for Authentication," the
icon is not displayed.)
system area of the home screen.
(If there is no check-mark on "Use IC Card for Authentication," the
icon is not displayed.)
G. Making and importing of the setting file for HID
card reading
NOTE: The following procedures are executed only when a
request is made by a user for customizing the data format
of IC card reading.
of IC card reading.
1)
Make the setting file for HID card reading.
For the making procedures, refer to the Manual of Setting File
for HID Card Reading.
for HID Card Reading.
2)
Copy the setting file to a USB memory.
3)
Import the setting file for HID card reading to the machine.
a)
Connect the USB memory to the USB connector in the
operation section.
operation section.
b)
System Settings -> Administrator Login -> User Control ->
Card Area Setting -> Importing from the Set Up File
Card Area Setting -> Importing from the Set Up File
c)
Select the file made in procedure 1) above.
d)
Press [Back] button.
(The setting file for HID card reading is loaded.)
(The setting file for HID card reading is loaded.)
4)
Perform the operation check.
a)
System Settings -> Administrator Login
Card Area Setting -> Card Scan Test
b)
While holding the IC card over the IC card reader, press
[Execute] button of “Card Scan Test”.
[Execute] button of “Card Scan Test”.
c)
The IC card data are loaded. The test result is displayed
as shown below:
as shown below:
Display when loading is successfully completed:
Click on the first or last page to see other MX-M266N / MX-M316N / MX-M356N (serv.man5) service manuals if exist.