Read Sharp MX-M266N / MX-M316N / MX-M356N (serv.man5) Service Manual online
IC card reader 6 – 2
3)
Attach the IC card reader to the IC card reader holder accord-
ing to the attachment reference ribs.
ing to the attachment reference ribs.
NOTE: The attachment reference position differs depending
on the kind of the IC card reader.
Holder type B
RDR-6081AKU, RDR-7582AKU
(The attachment reference position is the same in case of
the above model.)
(The attachment reference position is the same in case of
the above model.)
Holder type B
TWN3
(No reference position)
(No reference position)
Holder type C
Y591-EHID-201 v01
(No reference position)
(No reference position)
4)
Warp the harness of the IC card reader around the holder.
Then, attach the IC card reader holder to the operation panel
cabinet left.
Then, attach the IC card reader holder to the operation panel
cabinet left.
NOTE: Cable length is differs depending on type of card
reader, warp the cable followed by the following
instructions.
instructions.
Adjust the bind length of card reader cable and warp it with
banding band.
banding band.
Fix the banding band by inserting the lock part of it into the
hole in the frame.
hole in the frame.
Connect the USB mini harness to the card reader cable.
Click on the first or last page to see other MX-M266N / MX-M316N / MX-M356N (serv.man5) service manuals if exist.