Read Sharp MX-M266N / MX-M316N / MX-M356N (serv.man5) Service Manual online
IC card reader 6 – 5
When Decoded Data = 12345 ;
Example
Pre = #%
Post = abc
-> Padded Data = #%12345abc
D. Card reading test
After importing the user area setting to the machine, a test can be
executed to confirm that the cars is properly read. (* User control >
Card area setting > Card reading test (* Only the system settings of
the machine))
executed to confirm that the cars is properly read. (* User control >
Card area setting > Card reading test (* Only the system settings of
the machine))
Execute "User control > Card area setting > Card scan test"
The result displays after completion of a test are described below.
(When reading is successfully completed, the content of data read
from the card is displayed. When reading is failed, an error display
is made.)
(When reading is successfully completed, the content of data read
from the card is displayed. When reading is failed, an error display
is made.)
(1)
Error displays in case of a reading failure
(2)
Display when card reading is successfully
completed
completed
Read Success.
Card ID: XXXXXX
Facility Code: XXXXXX
* When card reading is successfully completed, the result is indi-
cated as shown above with the user information. Check to con-
firm that the displayed items are proper. If not, check the
improper item.
firm that the displayed items are proper. If not, check the
improper item.
HID setting file template
The extension of “ini” should be added.
Post
Back padding (Max. 3 characters)
* Only ASCII code printable characters can be used
* Only ASCII code printable characters can be used
for specification.
Details of error
Error display
Error content and remedy
Card is not
found.
found.
Content
Card is not found.
Remedy
Check to confirm that the card is securely set
in the card reader.
in the card reader.
Read Error.
Content
A read error occurs.
Remedy
Check to confirm that the card and card
reader operate normally with a personal
computer, etc.
reader operate normally with a personal
computer, etc.
hid_template E
;; HID setting file
# General information setting
[General]
Version=1.0
Card=HID
# Decode setting of the facility code
[Decoding\FacilityCode]
Location=ByPosition
Position=1
Length=8
# Decode setting of the card ID
[Decoding\CardId]
Location=ByDelimiter
Start.Delimiter=!
End.Delimiter=?
# Card ID padding setting
[Padding\CardId]
Pre=@@@
Post=\\\
[Padding\Data]
Key name
Description
Click on the first or last page to see other MX-M266N / MX-M316N / MX-M356N (serv.man5) service manuals if exist.