Read Sharp MX-M266N / MX-M316N / MX-M356N (serv.man5) Service Manual online
MX-M265N MX-FN26 (FINISHER) 7 – 3
12) Connect the connector of the harness to the PWB.
13)Remove the current the second paper exit right door unit and fix
the bundled second paper exit right door unit to the right cabinet
middle unit.
middle unit.
14)Fix the right cabinet middle.
15) Remove round-head screw from the connection unit which is
packed with the finisher, and remove the front cabinet lower
and the connection cabinet temporarily.
and the connection cabinet temporarily.
16) Slide the rail under the connection unit to the lock position.
17) Engage the finisher connection plate with the notch in the stay
at the right bottom of the machine.
Slide the connection plate to the bottom, and attach M3 screw
as shown. (Use the screw bundled to the package.)
as shown. (Use the screw bundled to the package.)
MEMO: Press the right side of the connection plate.
MEMO: The black mylar should not be on the metal plate of
MFP.
MFP.
1
: ‘15/May
1
2
: ‘15/Aug.
2
2
2
1
Click on the first or last page to see other MX-M266N / MX-M316N / MX-M356N (serv.man5) service manuals if exist.