MX-3050N, MX-3060N, MX-3070N, MX-3550N, MX-3560N, MX-3570N, MX-4050N, MX-4060N, MX-4070N (serv.man226). CCE 1504 REDUCTION OF OPERATING SOUND OF FUSER - Sharp Copying Equipment Technical Bulletin (repair manual). Page 2

Read Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man226) Technical Bulletin online

 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
                                                                                                                                              Page 2 of 2 
 
 
CR4 - How to apply Barrierta to reduce noise 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1  
2  
4  
3  
6  
5  
7  
8  
9  
Fusing unit 
Front side 
View from rear side 
Rear side 
Detach harness 
Remove 3 screws. 
Remove E ring and gear. 
Keep the removed E ring and 
gear in a safe place. 
Apply grease 
to this shaft. 
Application quantity:   
Size of a grain of rice 
Range of application 
(Make sure to apply grease on 
entire surface evenly.) 
After application of grease 
Do not apply the grease on the 
groove for E ring. 
Caution! 
For assembly, make sure that shaft 
and press are in proper position 
before fastening screws. 
Caution! 
Process the wire so that connector won't stick out. 
1  Orientation of the connector should be as show in 
the photo. Hook the connector rib on to holder rib to fix.   
2  Tuck in extra harness into the area indicated in red 
circle. 
Holder rib (indicated by red arrows) 
Connector rib (indicated by green arrows) 
Page of 2
Display

Download Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man226) Technical Bulletin