MX-3050N, MX-3060N, MX-3070N, MX-3550N, MX-3560N, MX-3570N, MX-4050N, MX-4060N, MX-4070N (serv.man170). CCE 1605 Rom Upgrade 3 V4 for Phoenix and Griffin. Please read instructions prior to Upgrade. - Sharp Copying Equipment Technical Bulletin (repair manual)

mx-3050n, mx-3060n, mx-3070n, mx-3550n, mx-3560n, mx-3570n, mx-4050n, mx-4060n, mx-4070n (serv.man170) technical bulletin
Model
MX-3050N MX-3060N MX-3070N MX-3550N MX-3560N MX-3570N MX-4050N MX-4060N MX-4070N (serv.man170)
Pages
14
Size
629.51 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / CCE 1605 Rom Upgrade 3 V4 for Phoenix and Griffin. Please read instructions prior to Upgrade.
File
mx-3050n-mx-3060n-mx-3070n-mx-3550n-mx-3560n-mx-35.pdf
Date

Read Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man170) Technical Bulletin online

 
 
 
 
 
 
 
 
 
 
 
 
 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
 
Date:   
 
21
st
 July 2016 
Model:   
 
See below 
Ref.:   
 
CCE 1605 
Colour:   
 
White 
Page:  
 
1 of 12 
TECHNICAL BULLETIN 
 
Note for the firmware update:   
Before updating the firmware, be sure to turn OFF the main power switch, and then turn it                                               
ON. 
If the firmware update procedure is executed while MFP is still operating, the panel 
becomes black after the firmware update and MFP may not be able to start up in some 
rare cases
 
Once the version is updated from 0201K100_16011400 or earlier version, it cannot be 
restored to the original version. 
 
If Google Drive is used on the version 04.00.K1.00/04.00.Z1.00 or earlier versions, the 
phenomenon that Google drive becomes unavailable occur. 
In this case, please change the setting of “Google Drive” of Cloud Connect Settings in 
System Settings to Enable. 
 
1. Model Name: 
MX-3050N/3550N/4050N/5050N/6050N 
 
MX-3060N/3560N/4060N/3070N/3570N/4070N/5070N/6070N 
 
MX-LC17/FN27/FX15 
 
2. Description: 
Upgrade of ICU,ASIC,PCU,SCU,SPF-ROM,E-Manual   
From July 2016 production 
Model 
ROM 
control No. 
BUNDLE 
ICU 
ASIC 
PCU 
SCU 
SPF 
E-Manual 
MX-3050N 
MX-3550N 
MX-4050N 
MX-5050N 
MX-6050N 
D00 
0400K100_ 
16061400 
0400K100  0400Z100  0400Z100  0300Z100 
0220K100 
MX-3060N 
MX-3560N 
MX-4060N 
MX-3070N 
MX-3570N 
MX-4070N 
MX-5070N 
MX-6070N 
0400Z100_ 
16061400 
0400Z100  0400Z100  0400Z100  0300Z100  0300Z100  0220Z100 
*Last 8-digit of BUNDLE version is displayed when updating the firmware in the field.    Factory default is 
fixed to 00000000. 
*When updating MX-3060N/3560N/4060N/3070N/3570N/4070 to this firmware, please also update OCR 
dictionary data at the same time. 
ROM UPGRADE..... (3). 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
    Item of change: See the separate sheet. 
 
 
 
 
Upgrade of FAX expansion kit, Paper feed tray, Finisher   
From mid-June 2016 production
 
Target model 
ROM 
control No. 
Firmware version 
MX-FX15 
B00 
02.00.Z1.00 
From July 2016 production
 
MX-LC17 
MX-LC17 
01.01.Z1.00 
  Note: Only for 45units of July production, ROM control No. is [A10●]. 
From September 2016 production
 
MX-FN27 
MX-FN27 
01.02.Z1.00 
    Item of change::See the separate sheet 
 
 
MX-3060N/3560N/4060N/3070N/3570N: ROM Version Combination History Table 
No. 
ROM 
Control 
No. 
BUNDLE 
ICU 
ASIC 
PCU 
SCU 
SPF 
E-Manual 
Action 
T/R No 
(2) 
B01 
0201Z100_ 
16011400 
0201Z100  0201Z100  0200Z100  0200Z100  0100Z10a  0150Z100 
2016/2 
Mid 
CCE-1515 
(1) 
B00 
0200Z100_ 
15121800 
0101Z100  0200Z100  0200Z100  0200Z100  0100Z10a  0150Z100 
2015/12 
Mid 
CCE-1507 
 
 
MX-3050N/3550N/4050N: ROM Version Combination History Table 
 
No.  Destination 
ROM 
Control 
No. 
BUNDLE 
ICU 
ASIC 
PCU 
SCU 
FAX 
E-Manual 
Action 
T/R No 
(2) 
North 
America 
B01 
0201K100_ 
16011400 
0201K100  0201Z100  0200Z100  0200Z100  0100Z100  0130K100 
2016/2 
Mid 
CCE-1515 
Except for 
North 
America 
A01 
(1) 
ALL 
B00 
0200Z100_ 
15121800 
0200K100  0200Z100  0200Z100  0200Z100  0100Z100  0130K100 
2015/12 
Mid 
CCE-1507 
 
 
ROM Version Combination History Table of the finisher 
No. 
Target model  ROM Control No. Firmware version 
Action 
T/R No 
(1) 
MX-FN28 
MX-FN30 
MX-FN31 
A01 
01.01.Z1.00 
2016/5 
Mid 
CCE-1584 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
MX-FN27 
MX-FN29 
A11 
 
 
【Description】 
 
No. 
Item 
Description 
Model 
MX-3050N 
MX-3550N 
MX-4050N 
MX-3060N 
MX-3560N 
MX-4060N 
MX-3070N 
MX-3570N 
MX-4070N 
MX-5050N 
MX-6050N 
MX-5070N 
MX-6070N 
Main unit 
control 
Correction of failure to retrieve information on auto registered user via E-RIC 
○ 
○ 
○ 
○ 
Main unit 
control 
Correction of failure to respond properly after double tapping Home key 
○ 
○ 
○ 
○ 
Main unit 
control 
Correction of the problem that E7-93 trouble occurs while restoring the data 
in Document Filing from past models   
○ 
○ 
○ 
○ 
Main unit 
control 
Correction of E7-20 trouble occasionally caused by the misdetection 
○ 
○ 
○ 
○ 
Main unit 
control 
Modification has been made to eliminate "Display only in MFP" from the 
options of "View Password Entry Screen" in Remote operation so that it is 
now selectable from 2options; "Display in Both PC and MFP" and "Display 
only in PC". 
○ 
○ 
Done 
Done 
Main unit 
control 
Modification has been made to be unable to change the settings of Paper 
Type, Paper Size, Feeding Approved Job, Weight of Plain Paper for Paper 
Tray from Web Page. 
*When updating the version from 0201K100_16011400 or earlier version, 
the modification will not be reflected. 
○ 
○ 
Done 
Done 
Main unit 
control 
Modification has been made to be able to edit the address book from Web 
Page while operating the main unit, and the message displayed on the main 
unit during editing the Address Book has been changed. 
○ 
○ 
Done 
Done 
Main unit 
control 
Correction of “PPD2-PRI” jam 
Restoring the data in Document Filing from past model and then reprint the 
data causes “PPD2-PRI” jam. 
○ 
○ 
Done 
Done 
Main unit 
control 
Correction of “E7-03” which may occur depending on the timing when 
starting up the machine 
○ 
○ 
Done 
Done 
10 
Main unit 
control 
Correction of failure for touch panel to respond after recovering from power 
save mode in low temperature environment 
○ 
○ 
Done 
Done 
11 
Main unit 
control 
Correction of H3-02 error and enhancement to prevent misdetection of H4 
error 
○ 
○ 
Done 
Done 
12 
Main unit 
control 
Preventive measure against Cartridge eject error (F2-95 to 98) 
This measure will be necessary because there are units with an eject arm 
with less force to eject the cartridge. 
○ 
○ 
Done 
Done 
13 
Main unit 
control 
Correction of L4-03 error 
When a cover is opened after MFP entering Eco scan mode during 
warm-up, the L4-03 error occurs due to misdetection. 
○ 
○ 
Done 
Done 
14 
Main unit 
control 
Correction of the misalignment from the center when changing the ratio 
with“Side1/2, XY Ratio Settings”in Paper Settings of Web Page   
○ 
○ 
Done 
Done 
15 
Main unit 
control 
Correction of the problem that Hidden Pattern Print cannot be performed 
when pressing “Print Now” in Document Filling 
○ 
○ 
Done 
Done 
16 
Main unit 
control 
Correction of the problem that the error is displayed by specifying the top 
tray as the exit tray of FAX when MX-FN31 (Saddle Finisher) is installed. 
○ 
○ 
Done 
Done 
17 
Main unit 
control 
Correction of the following problem: 
When Auto Power Shut-Off is enabled and also the motion sensor mode is 
○ 
○ 
Done 
Done 
○=applied 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
enabled, the machine occasionally cannot wake up from Energy Save 
mode. 
18 
Main unit 
control 
Correction of the following problem: 
When MX-FN31 (Saddle Finisher) is installed if the pamphlet print is 
performed with Split ON, it is split by 15 pages although it should be split by 
20 pages.   
○ 
○ 
Done 
Done 
 
No. 
Item 
Description 
Model 
MX-3050N 
MX-3550N 
MX-4050N 
MX-3060N 
MX-3560N 
MX-4060N 
MX-3070N 
MX-3570N 
MX-4070N 
MX-5050N 
MX-6050N 
MX-5070N 
MX-6070N 
19  Main unit control 
Correction of the following problem: 
When pressing the power key of the panel while MFP is waking up from 
Energy Save mode by the motion sensor (For approx. 1.5-sec), the 
detection processing of the power key of the panel will be disabled, and then 
the power key of the panel will stop responding. 
○ 
○ 
Done 
Done 
20  Main unit control  Correction of U2-91 which may be caused after the power OFF/ON 
○ 
○ 
Done 
Done 
21  Main unit control 
Modification to eliminate the noise from the relay working on the 
dehumidification heater or the noise from the fan driving which are 
generated when receiving the network packet of Web Page reference etc. in 
Energy Save mode. 
○ 
○ 
Done 
Done 
22  Main unit control  Correction of C4-20 trouble occasionally caused by the misdetection 
NA 
NA 
○ 
○ 
23  Main unit control 
Correction of the following problem: 
The status indicator lamp does not light red when the toner cover of 50/60 
PPM machines is opened. 
NA 
NA 
○ 
○ 
24 
Image quality 
Correction of problem with coloring image 
This problem occurs while printing with Overlays setting or printing the 
image of overlapped graphics. 
○ 
○ 
○ 
○ 
25 
Image quality 
Correction of background appeared on void area of scanned image with 
Compression Ratio being set to "High” 
○ 
○ 
○ 
○ 
26 
Image quality 
Correction of contamination on white paper which occurs while performing a 
job with odd number of original / duplex print setting etc. 
○ 
○ 
Done 
Done 
27 
Image quality 
For the improvement of the accuracy of the laser power correction, the 
modification has been made not to apply the correction value manually 
adjusted by the user or the service personnel to the data which is output with   
SIM61-11(Laser power auto correction) and SIM61-12(Laser power manual 
correction).   
○ 
○ 
Done 
Done 
28 
Image quality 
Correction of the image runout which may be caused on the backside when 
performing DSPF duplex scan 
NA 
○ 
Done 
Done 
29 
Image quality 
Addition of the button to execute the main charger cleaning mode to System 
Settings to enable the administrator to perform the cleaning of the main 
charger when the black line or color line (streak mottle) appears on the 
printed paper 
NA 
NA 
○ 
○ 
30 
Image quality 
Improvement of the problem that the uneven charge may be caused on 
50/60 PPM models in low humidity environment.   
NA 
NA 
○ 
○ 
31 
Printer
 
On DirectOffice, the following modifications have been made: 
*Support of Arabic, Hebrew, and Thai languages 
*Correction of the problem that the frame border is printed when performing 
Direct Print 
○ 
○ 
○ 
○ 
32 
Printer
 
Correction of data becomes unprintable while continue printing using Print 
Release 
○ 
○ 
○ 
○ 
33 
Printer
 
Modification has been made to store the printer job received in Remote PC 
○ 
○ 
Done 
Done 
○=applied 
Page of 14
Display

Download Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man170) Technical Bulletin

Here you can read online and download Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man170) Technical Bulletin in PDF. MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man170) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man170) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.