MX-3050N, MX-3060N, MX-3070N, MX-3550N, MX-3560N, MX-3570N, MX-4050N, MX-4060N, MX-4070N (serv.man120). CCE 1699 CHANGE IN PARTS FOR 3K FINISHER FN30 31 - Sharp Copying Equipment Technical Bulletin (repair manual)

mx-3050n, mx-3060n, mx-3070n, mx-3550n, mx-3560n, mx-3570n, mx-4050n, mx-4060n, mx-4070n (serv.man120) technical bulletin
Model
MX-3050N MX-3060N MX-3070N MX-3550N MX-3560N MX-3570N MX-4050N MX-4060N MX-4070N (serv.man120)
Pages
8
Size
764.49 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / CCE 1699 CHANGE IN PARTS FOR 3K FINISHER FN30 31
File
mx-3050n-mx-3060n-mx-3070n-mx-3550n-mx-3560n-mx-35.pdf
Date

Read Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man120) Technical Bulletin online

 
 
 
 
 
 
 
 
 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
 
Date:   
 
3
rd
    March 2017 
Model:   
 
See below 
Ref.:   
 
CCE 1699 
Colour:   
 
White 
Page:  
 
1 of 8 
TECHNICAL BULLETIN 
CHANGE IN PARTS FOR 3K FINISHER 
 
1. Model Name: 
MX-FN30/FN31(Option for MX-3050N/3550N/4050N/5050N/6050N 
 
 
MX-3060N/3560N/4060N/3070N/3570N/4070N/5070N/6070N) 
 
2. Description: 
Various parts of Finisher have been modified as below: 
(1) For the enhancement of the issue that the belt of Processing tray unit comes off, the 
flange washer has been added and the resin clip has been replaced with E-ring. 
*Bushing, parallel pin, plain washer, 16T pulley, bearing, and E-ring are no longer supplied 
as the single parts and those parts are supplied as the assembled parts of Delivery roller 
(ROLLER, PAPER DELIVER) for serviceability improvement.   
 
 
  - Delivery roller (ROLLER, PAPER DELIVER)   
 
        Before change 
 
 
        After change 
 
 
 
 
 
 
 
 
 
 
  - Location of Delivery roller (ROLLER, PAPER, DELIVERY)   
(Excerpt from Parts Guide 3 INTERNAL COMPONETS 1) 
 
 
 
 
 
 
 
Resin clip 
E-ring 
Flange washer 
Delivery roller (ROLLER, PAPER, DELIVERY) (Parts highlighted 
in yellow are no longer supplied as the single parts)   
 
 
                                 
 
 
 
(2) Washer added between Bearing and E-ring to improve the smoothness of up-and-down 
operation of Delivery tray. 
 
    - Location of Washer added (Excerpt from Parts Guide 7 INTERNAL COMPONETS 3) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
(3) Since the affixation position of Cushion attached to the cabinet is unclear, the mark is added 
to the flame and the design of cover cushion has been changed. 
 
  - Addition of the mark to the frame 
 
          Before change 
 
 
            After change 
 
 
 
 
 
 
 
 
 
  - Design change of Cushion   
 
          Before change 
 
 
                    After change 
 
 
 
 
 
 
 
 
 
Washer added between No.38 (Bearing) and No.75 (E-ring) 
 
Mark added 
15mm 
15mm 
36.1mm 
26mm 
 
                                 
 
 
 
 
  - Location of Cushion (Excerpt from Parts Guide 3 INTERNAL COMPONENTS 1) 
   
 
 
 
 
 
 
 
 
 
 
 
 
(4) Flexible caster (CASTER, FREE) has been changed for productivity improvement due to the 
common use with other models. 
 
  - Flexible caster (CASTER, FREE) (Excerpt from Parts Guide 3 INTERNAL COMPONENTS 1) 
 
 
 
 
 
 
 
 
 
(5) Resin clip has been replaced with E-ring as the countermeasure of the issue that the drive 
gear resin clip of Paper transport system comes off when replacing the staple-free staple in 
the field. 
 
  - Location of E-ring (Excerpt from Parts Guide 3 INTERNAL COMPONENTS 1) 
 
 
 
 
 
 
Left side cover cushion 
Flexible caster 
Replaced with E-ring 
 
                                 
 
 
 
 
 
(6) Design of Ejection roller clutch caulking assy (STACKING, BRACKET, CL, EXIT, ROL) has 
been changed and also E-ring has been disused for stability improvement at the time of 
installation. 
- Design change of Ejection roller clutch caulking assy (STACKING, BRACKET, CL, EXIT, 
ROL)/ Disuse of E-ring (Excerpt from Parts Guide 18 PAPER FEED DISPOSE ASSEMBLY 2) 
 
 
 
 
 
 
 
 
 
 
 
 
(7) Following modifications have been made for productivity improvement due to the common 
use with other models. 
(1) Disuse of the shaft of Cover hinge (HINGE, COVER) 
(2) Disuse of Transmission shaft (TRANSMISSION, SHAFT)   
(3) Design change of Lock holder (HOLDER, LOCK) 
Interchangeability of Cover hinge/Lock holder 
 
Lock holder (Old) 
Lock holder (New) 
Cover hinge (Old) 
OK 
OK 
(Shaft of Cover hinge needs to 
be removed.)
 
Cover hinge (New) 
NG 
OK 
(1) Disuse of the shaft of Cover hinge (HINGE, COVER) 
 
        Before change 
 
 
    After change 
 
 
 
 
 
 
E-ring disused 
Shaft 
No shaft 
Page of 8
Display

Download Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man120) Technical Bulletin

Here you can read online and download Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man120) Technical Bulletin in PDF. MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man120) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man120) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.