MX-3050N, MX-3060N, MX-3070N, MX-3550N, MX-3560N, MX-3570N, MX-4050N, MX-4060N, MX-4070N (serv.man32). Print release Guide PDF - Sharp Copying Equipment User Guide / Operation Manual

mx-3050n, mx-3060n, mx-3070n, mx-3550n, mx-3560n, mx-3570n, mx-4050n, mx-4060n, mx-4070n (serv.man32) user guide / operation manual
Model
MX-3050N MX-3060N MX-3070N MX-3550N MX-3560N MX-3570N MX-4050N MX-4060N MX-4070N (serv.man32)
Pages
10
Size
1.11 MB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
Copying Equipment / Print release Guide PDF
File
mx-3050n-mx-3060n-mx-3070n-mx-3550n-mx-3560n-mx-35.pdf
Date

Read Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man32) User Guide / Operation Manual online

Print Release Settings Guide
2
Print Release Settings Guide
TABLE OF CONTENTS
ABOUT THIS GUIDE
This guide explains how to use the print release function.
Please note
• The explanations in this manual assume that you have a working knowledge of your Windows or Mac OS computer.
• For information on your operating system, please refer to your operating system manual or the online Help function.
• The explanations of screens and procedures in this manual are primarily for Windows
®
 8 in Windows
®
 environments, 
and Mac OS X 10.10 in Mac OS environments. The screens may vary depending on the version of the operating 
system.
• Considerable care has been taken in preparing this manual. If you have any comments or concerns about the manual, 
please contact your dealer or nearest authorized service representative.
• This product has undergone strict quality control and inspection procedures. In the unlikely event that a defect or other 
problem is discovered, please contact your dealer or nearest authorized service representative.
• Aside from instances provided for by law, SHARP is not responsible for failures occurring during the use of the 
product or its options, or failures due to incorrect operation of the product and its options, or other failures, or for any 
damage that occurs due to use of the product.
Warning
• Reproduction, adaptation or translation of the contents of the manual without prior written permission is prohibited, 
except as allowed under copyright laws.
• All information in this manual is subject to change without notice.
ABOUT THIS GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2
PRINT RELEASE FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
BEFORE USING THE PRINT RELEASE FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
• Settings required on the machine  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . .  4
• Installing the printer driver of the primary unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . .  5
USING THE PRINT RELEASE FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
• Storing a job in the primary unit from your computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . .  6
• Printing/deleting a job stored in the primary unit from a secondary unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . .  8
• The display screens, messages, and key names shown in the manual may differ from those on the actual machine 
due to product improvements and modifications.
• The explanations in this manual are based on American English and the North American version of the software. 
Software for other countries and regions may vary slightly from the North American version.
3
Print Release Settings Guide
PRINT RELEASE FUNCTION
When there are multiple machines that support the print release function on the same network, you can use the print 
release function to save data in the machine that is set as the primary unit and then print the saved data from secondary 
unit which you set (multiple secondary units can be set).
For the number of secondary units that can be controlled by one primary unit, consult your dealer.
• The memory area for saving print release jobs is 16 GB.
• When user authentication is enabled, only jobs of the logged-in user can be printed.
Primary Unit
Secondary Unit
Secondary Unit
Computer
TCP/IP network
Saving a job in the 
primary unit.
You can print a job saved in 
the machine (primary unit) 
from other machine 
(secondary unit) on the 
same network.
4
Print Release Settings Guide
BEFORE USING THE PRINT RELEASE 
FUNCTION
This section explains settings that must be configured before you can use the Print Release function.
Settings required on the machine
The following settings must be configured on the machine in order to use the print release function. (Administrator rights 
are required.)
System settings
Tap the [Settings] key on the touch panel of the machine and log in with administrator rights. Tap [System Settings] > 
[Printer Settings] > [Print Release Settings], and configure the settings.
For the system settings, refer to the User's Manual.
Item
Settings
• Print Release
Select [Enable].
• Connecting Code
Enter a code for authentication between the primary unit and secondary 
unit. Maximum of 32 alphanumeric characters. Be sure to enter the same 
code in both the primary unit and secondary unit. 
Entry of a code can be omitted.
• Primary Unit/Secondary Unit Setting
Select the machine in which print release jobs will be saved in [Primary 
Unit]. Select the machine that will be used for printing in [Secondary Unit].
• Require Authentication when Storing (When 
[Primary Unit] is selected)
Select whether or not authentication is required to store a print release job 
in the machine that is functioning as the primary unit. If the user 
authentication setting of the primary unit is disabled, jobs will be saved 
without authentication even if [Enable] is selected.
• Address of Primary Unit (When [Secondary 
Unit] is selected)
Enter the IP address or host name of the primary unit.
• Port Number
Set the port number used for print release in the primary unit and in the 
secondary unit. Be sure to set the same number in both the primary unit 
and the secondary unit. (The default port number is "53000", and there is 
no particular need to change this.)
• Default Settings
• Print  B/W
When [Enable] is selected, [Print B/W] is enabled in the print screen of the 
print release job.
• Print and Delete the Data
When [Enable] is selected, [Print and Delete the Data] is enabled in the 
print screen of the print release job.
• Delete Stored Data after Specified Time
Select whether or not stored print release jobs are automatically deleted 
after a set time elapses. If you select [Enable], jobs that have been stored 
the number of days set in “Days” will be automatically deleted.
• Days
When “Delete Stored Data after Specified Time” is enabled, set the number 
of days jobs are stored.
• HDD Status
Displays the usage status of the hard disk drive.
• Delete All (When [Primary Unit] is selected)
When the machine functions as the primary unit, select this to delete all 
stored print release jobs.
Page of 10
Display

Download Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man32) User Guide / Operation Manual

Here you can read online and download Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man32) User Guide / Operation Manual in PDF. MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man32) user guide / operation manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man32) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.