MX-3050N, MX-3060N, MX-3070N, MX-3550N, MX-3560N, MX-3570N, MX-4050N, MX-4060N, MX-4070N (serv.man225). CCE 1507 ROM UPGRADE ..... (1). 02.00.Z1.00 Bulletin Only - Sharp Copying Equipment Technical Bulletin (repair manual)

mx-3050n, mx-3060n, mx-3070n, mx-3550n, mx-3560n, mx-3570n, mx-4050n, mx-4060n, mx-4070n (serv.man225) technical bulletin
Model
MX-3050N MX-3060N MX-3070N MX-3550N MX-3560N MX-3570N MX-4050N MX-4060N MX-4070N (serv.man225)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
203.38 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / CCE 1507 ROM UPGRADE ..... (1). 02.00.Z1.00 Bulletin Only
File
mx-3050n-mx-3060n-mx-3070n-mx-3550n-mx-3560n-mx-35.pdf
Date

Read Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man225) Technical Bulletin online

 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
この資料に掲載されている表示価格は消税抜きです。 
 
 
TECHNICAL BULLETIN 
 
Date:   
19
th
 Jan 2016 
Model:   
See below 
Ref.:   
CCE 1507 
Colour:   
    White 
Page:  
  1 of 3 
ROM UPGRADE ..... (1). 
 
Note for the firmware update:    Before updating the firmware, be sure to 
turn OFF the main power switch, and then turn it ON. 
 If the firmware update procedure is executed while MFP is still operating, the 
panel becomes black after the firmware update and MFP may not be able to 
start up in some rare cases.   
1. Model Name:  
MX-3060N/3560N/4060N/3070N/3570N/4070N/3050N/3550N/4050N 
 
2. Description:  
1) Upgrade of ASIC-ROM: MX-3070N/3570N/4070 for North America 
From mid-January 2015 production 
ROM 
control No. 
BUNDLE 
ICU 
ASIC 
PCU 
SCU 
SPF 
E-Manua
B00 
0200Z100_ 
15121800 
0200Z100 
0200Z100 
0200Z100 
0200Z100 
0100Z10a 
0150Z10
*Last 8-digit of BUNDLE version is displayed when updating the firmware in the field.     
Factory default is fixed to 00000000. 
    Item of change: See the attached sheet 
 
2) Upgrade of ASIC, PCU-ROM: 
MX-3060N/3560N/4060N/3070N/3570N/4070N for all destinations except for 
North America 
From mid-January 2015 production 
ROM 
control No. 
BUNDLE 
ICU 
ASIC 
PCU 
SCU 
SPF 
E-Manu
al 
B00 
0200Z100_ 
15121800 
0200Z100 
0200Z100 
0200Z100 
0200Z100 
0100Z10a 
0150Z10
*Last 8-digit of BUNDLE version is displayed when updating the firmware in the field.     
Factory default is fixed to 00000000. 
    Item of change: See the attached sheet 
 
 
Page 2 of 3 
 
 
3) Upgrade of ASIC, PCU-ROM: MX-3050N/3550N/4050N for North America
 
From mid-January 2015 production 
ROM 
control No. 
BUNDLE 
ICU 
ASIC 
PCU 
SCU 
FAX 
E-Manual 
B00 
0200Z100_ 
15121800 
0200K100 
0200Z100 
0200Z100 
0200Z100 
0100Z100 
0130K100 
*Last 8-digit of BUNDLE version is displayed when updating the firmware in the field.     
Factory default is fixed to 00000000. 
    Item of change: See the attached sheet 
 
【Description】Same for (1), (2), and (3) 
No. 
Item 
Details 
Specification 
change 
Addition of the function that automatically extracts the multiple originals placed on the 
document glass and individually creates the files (Multiple cropping function). 
Specification 
change 
Support of Mopria Alliance 
Specification 
change 
Support of Google Cloud Print 
Specification 
change 
Support of AD collaboration: 
- Participation in AD domain 
- Access to AD resource 
- Single sign-on 
Specification 
change 
Addition of the function to display the alert message if FAX cable is disconnected when FAX 
Soft SW 8-8 is set 
to “0”. 
6  Main unit control 
MFP cannot wake up from Energy Save mode or the operation panel becomes black after 
“Please wait (5 languages)” message is displayed even if the main power switch is turned 
OFF/ON. This problem has been corrected. 
7  Main unit control 
Correction of the trouble that the data scanned to USB flash drive may be corrupted. 
8  Main unit control 
If the firmware update procedure is executed while MFP is still operating, the operation panel 
becomes black after the firmware update and MFP may not be able to start up in some rare 
occasions.    This problem has been corrected. 
9  Main unit control 
Correction of the trouble that the setting of Auto Power Shut-Off Timer cannot be changed 
from Default Settings screen of System Settings. 
10  UI 
If you load the paper to the bypass tray while the simulation is in progress, and select the 
paper type of the bypass tray after getting out of the simulation, then you may not be able to 
use the bypass tray afterward.    This problem has been corrected. 
11  FAX 
Correction of the trouble that I-FAX sending job completion history will be no longer recorded 
once the history reaches 99. 
12  FAX 
When printing FAX list like Transaction Report, the job occasionally cannot correctly be 
completed depending on the timing, and the subsequent FAX reception print job cannot be 
started to print.    This problem has been corrected.   
13  Copier 
Correction of occasional lockup which occurs while checking a copy job with Multi Shot 
feature on Preview screen. 
 
Page 3 of 3 
 
14  Printer 
Correction of printing of an image with a frame. This problem occurs if particular PDF file is 
printed via PS driver with resolution 1200dpi. 
15  Main unit control 
Correction of failure to recognize USB flash drive. 
16  Network 
Correction of errors with any service which utilizes DNS. This is due to the false reading of 
registered DNS server address during wireless connection (in infrastructure mode with 
disabling DHCP) 
17  Network 
18  Network 
Correction of failure to scan to Network Folder on Windows Server 2012/2008 
19  Network 
Correction of machine lock up on rare occasions. This problem may occur while receiving 
mDNS packets after HTTPS communication. 
20  Network 
Correction of data transmission error which occurs while forwarding the received fax data to 
HDD (shared) on MFP. 
21  UI 
Correction of failure with changing tray setting. The setting can't be changed by pressing 
Tray Settings key registered on the fixed area on lower side of Home screen. 
22  Simulation 
Default Service Simulation mode has been changed to Easy Mode for Australia. 
 
【Description】Only for (2) and (3) 
1  Image quality 
Speed value of PS motor (RRM) has been changed as a remedy for streaks generated at 
rear edge of Transfer. 
- Default value of items A/B in Sim48-06: Changed from 56 to 53. 
*This default value won't change after upgrading firmware in field. 
 
Page of 3
Display

Download Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man225) Technical Bulletin

Here you can read online and download Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man225) Technical Bulletin in PDF. MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man225) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man225) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.