AR-PE1 (serv.man42). ARPE1-001 Setting up the ARPE1 Fiery Controller on a Windows 9x Peer-Peer Network - Sharp Copying Equipment Technical Bulletin (repair manual). Page 14

Read Sharp AR-PE1 (serv.man42) Technical Bulletin online

Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 021.doc
Page:  14 of 14
4.3  Now go to the Fiery Printing tab and ensure that A4 is the default paper size within the paper
source window.
4.4  Now click on Finishing and ensure that the Page Order is set to Reverse. This ensures that multi
paged documents are printed with their last page at the bottom face up and their first page at the
top face up. At this point you can also set any other printer driver defaults that you may wish to
set.
4.5  You can now click on the General tab and print out a test page. The installation is now complete.
Perform this procedure on all workstations that wish to print through the ARPE1. If you wish to
have multiple drivers installed that allows printing via the DIRECT or HOLD queues, the
procedure must be performed a second and third time.
Page of 14
Display

Download Sharp AR-PE1 (serv.man42) Technical Bulletin