Read Sharp AR-PE1 (serv.man42) Technical Bulletin online
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 021.doc
Page: 7 of 14
Convert Paper Sizes
To overcome possible Letter sized print jobs stalling the printer, alter this setting to
“Letter/11x17>A4/A3”. Press the OK key after making this selection.
“Letter/11x17>A4/A3”. Press the OK key after making this selection.
Page Order
For an ARC150, ensure that the Page Order is changed from Forward to Reverse. This
ensures that multi paged documents are printed with their last page at the bottom face up
and their first page at the top face up.
ensures that multi paged documents are printed with their last page at the bottom face up
and their first page at the top face up.
Colour Mode
The default setting is CMYK , which means that printing is performed in colour. The
alternative setting is greyscale.
alternative setting is greyscale.
Print To PS
When set to Yes, a Postscript error page will be output from the machine if a postscript
error occurs. As default, this setting is set to No and so if a postscript error occurs the print
job will simply be flushed from the system.
error occurs. As default, this setting is set to No and so if a postscript error occurs the print
job will simply be flushed from the system.
Allow Courier Substitution
If the fonts requested in the print job are not in the printer or within the print job, a
postscript error could occur. To overcome this, set this setting to Yes and any missing
fonts will be replaced with the Courier font. This ensures that at least you obtain your
printed document albeit with the altered font.
postscript error could occur. To overcome this, set this setting to Yes and any missing
fonts will be replaced with the Courier font. This ensures that at least you obtain your
printed document albeit with the altered font.
Print Cover Page
Is a cover page required before every printed job? The default is No.
Select Yes when prompted to Save Changes? Press the OK key.
Scroll up the screen and select Exit Setup. The ARPE1 will reboot.
Note:
Up to 15 minutes after coming to the ready condition, the AR-PE1 will appear in Network
Neighbourhood as a computer with the name entered as the Server Name entered in
Server/Windows Setup. The actual time required for the ARPE1 to appear in the Network
Neighbourhood will depend on the size of the workgroup and the number of other protocols used
on the network. The ARPE1 can also be found by clicking on Start, Find, and Computer; then
type the name entered as Server Name previously. When the icon for the ARPE1 is doubled
clicked, printer icons will appear. The names of the printers will be displayed as Print, Hold, and
Direct if all queues were published. The ARPE1 print drivers must be installed to make use of
these printers.
Neighbourhood as a computer with the name entered as the Server Name entered in
Server/Windows Setup. The actual time required for the ARPE1 to appear in the Network
Neighbourhood will depend on the size of the workgroup and the number of other protocols used
on the network. The ARPE1 can also be found by clicking on Start, Find, and Computer; then
type the name entered as Server Name previously. When the icon for the ARPE1 is doubled
clicked, printer icons will appear. The names of the printers will be displayed as Print, Hold, and
Direct if all queues were published. The ARPE1 print drivers must be installed to make use of
these printers.
Click on the first or last page to see other AR-PE1 (serv.man42) service manuals if exist.