Read Sharp AR-PE1 (serv.man41) Technical Bulletin online
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 022.doc
Page: 1 of 16
Installation Of the ARPE1 on a Windows NT4
Network
Model Name:
ARPE1 Fiery Controller
Pre-requisites:
Windows NT 4.0 Workstation or Server CD
The Sharp ARPE1 and User Software CD
An ARPE1 and ARC150 colour copier
An ARPE1 and ARC150 colour copier
Note:
It may be necessary to use the Microsoft Windows NT 4.0 CD and the Sharp
ARPE1 User CD during installation. Items in italics indicate icons, buttons, or
menu options during installation.
ARPE1 User CD during installation. Items in italics indicate icons, buttons, or
menu options during installation.
If the ARPE1 is going to join a Domain, ensure that a computer account is made
for the ARPE1 on a domain controller, prior to performing the procedures below.
Procedure: This installation consists of four separate tasks:
1. Setup of TCP/IP on the NT 4.0 Workstation or Server.
2. Setup of the ARPE1.
3. Installation of the Print Driver.
4. Configuration of the Print Driver.
2. Setup of the ARPE1.
3. Installation of the Print Driver.
4. Configuration of the Print Driver.
Setup of TCP/IP on the NT 4.0 Workstation or Server
1. To begin installation, click on Start-Settings-Control Panel on the NT4
Workstation or Server. Double click the Network icon.
Date:
30th March 2000
Model: ARPE1
Ref:
Ref:
002
Colour Code:
Orange (C)
Page:
1 of 16
NIS SYSTEMS SUPPORT
BULLETIN
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 022.doc
Page: 2 of 16
1.1 In the Network applet, click on the Protocols tab.
1.2 Confirm that the TCP/IP Protocol is installed, and configured with a valid IP address, subnet
mask, and default gateway by clicking on the TCP/IP Protocol and clicking on Properties.
This information must be obtained from the Network Administrator.
This information must be obtained from the Network Administrator.
1.3 If the TCP/IP Protocol is not already in the list of protocols, perform the following steps:
a. Click
Add.
b. Double click on TCP/IP Protocol.
c. Insert the Windows NT CD ROM or enter the equivalent source path.
d. Enter the TCP/IP address, Subnet Mask, and Default Gateway as supplied by the
c. Insert the Windows NT CD ROM or enter the equivalent source path.
d. Enter the TCP/IP address, Subnet Mask, and Default Gateway as supplied by the
Network Administrator.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 022.doc
Page: 3 of 16
1.4 Click on the Services tab to verify Microsoft TCP/IP Printing is installed.
If Microsoft TCP/IP Printing is not already installed, perform the following steps:
a. Click
Add.
b. Double-click
on
Microsoft TCP/IP Printing.
c. Insert the Windows NT CD-ROM or enter the equivalent source path as requested.
1.5 Click OK to close the Network applet and reboot the PC to load the service.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 022.doc
Page: 4 of 16
Setting up the ARPE1
2. Restart the ARPE1. When the ARPE1 completes its power up sequence, the screen below will
be displayed on the LCD panel.
2.1 Press the Menu button (left middle button) once to enter the Functions screen.
2.2 Press the Scroll Down button (left lower button) once on the ARPE1 to view the remaining
selections for the Functions screen.
2.3 Select Run Setup by pressing the second button on the right-hand side. The screen prompts
you to Continue to Setup. Press the controller’s button next to OK and the ARPE1 enters the
setup mode.
setup mode.
2.4 The Setup screen appears on the controller’s display.
Server Name
Idle
Idle
4524 MB 1.0
Info
Print Pages
Suspend Printing
Resume Printing
Shut Down
Suspend Printing
Resume Printing
Shut Down
Functions
Continue to Setup?
Yes
Run Setup
OK
Clear Server
Run Setup
Run Diagnostics
Calibration
Run Setup
Run Diagnostics
Calibration
Functions
Exit Setup
Server Setup
Network Setup
Printer Setup
Server Setup
Network Setup
Printer Setup
Setup
