Read Sharp AR-F14 (serv.man5) Service Manual online
AR-F14/PN1 DISASSEMBLY AND ASSEMBLY 5-19
(3)Removing the LED PCB
1) Remove the waste case.
2) Disconnect connector [1].
3) Remove the harness [3] from the harness guide [2].
3) Remove the harness [3] from the harness guide [2].
Fig.F03-202-04
4) Remove the screw [4] and washer [5].
5) Disconnect the connector [6].
6) Remove the screw [7] to detach the base cover [8].
6) Remove the screw [7] to detach the base cover [8].
Fig.F03-202-05
7) Remove the screw [9].
8) Disconnect the connector [10] to remove the LED PCB [11].
Fig.F03-202-06
(4)Removing the Waste-Full Photosensor PCB
1) Remove the punch controller PCB. (See 2.B.(1).)
2) Remove the two screws [1] to remove the PCB film [2].
Fig.F03-202-07
3) Disconnect the connector [3] to remove the waste-full photosensor
PCB [4].
Fig.F03-202-08
(5)Removing the Waste Full LED PCB
1) Remove the screw [1].
2) Disconnect the connector [2] to remove the waste-full LED PCB [3].
Fig.F03-202-09
[1]
[3]
[2]
[8]
[4]
[5]
[7]
[6]
[11]
[10]
[9]
[2]
[1]
[4]
[3]
[2]
[1]
[3]
[05]DISASSEMBLYANDASSEMBLY.fm 19 ページ ２００４年４月１９日 月曜日 午後１時３８分
