AR-F14 (serv.man5). 5. Disassembly and assembly - Sharp Copying Equipment Service Manual (repair manual). Page 14

Read Sharp AR-F14 (serv.man5) Service Manual online

AR-F14/PN1 DISASSEMBLY AND ASSEMBLY 5-14
g. Decolor roller
1) Remove the frame unit.
2) Remove the E-ring, the gear, and the bearing. Remove the decolor
roller.
*
When removing or attaching the roller, be careful of the actuator.
(2) Interface transport unit
a. Docking unit
1) Remove the screw, and slide the upper cover as shown in the figure. 
2) Remove the screws C from the upper side of the front cover, and
remove the front cover and the docking unit.
3) Remove the two screws and remove the front cover. 
4) Remove the four screws, and remove the left cover.
5) Open the transport unit cover. 
6) Remove the two screws A (M4 x 10).
7) Pull out the transport unit to the copier unit guide. 
8) Remove the docking unit connector, and pull it out.
b. Paper entry sensor 1
1) Remove the paper entry sensor 1, and remove the connector.
c. Photo sensor
1) Remove the photo sensor, and remove the connector.
d. Paper entry sensor 2
1) Remove the paper entry sensor 2, and remove the connector.
1
2
4
3
5
6
6
7
8
copier unit guide
[05]DISASSEMBLYANDASSEMBLY.fm  14 ページ  2004年4月19日 月曜日 午後1時38分
Page of 19
Display

Click on the first or last page to see other AR-F14 (serv.man5) service manuals if exist.