Read Sharp AR-F14 (serv.man6) Service Manual online
AR-F14/PN1 MAINTENANCE 6-1
[6] MAINTENANCE
1. Maintenance System Table
2. Discarding punch waste (when a punch unit is installed)
1) Press the detach button and separate the saddle stitch finisher from
the machine.
Caution: The saddle stitch finisher and the machine are connected at
the rear. Exercise caution when pulling them apart.
2) Gently pull the punch waste receptacle forward and discard the
punch waste.
Empty the punch waste receptacle into a garbage bag or other container,
taking care not to let punch waste scatter.
taking care not to let punch waste scatter.
3) Replace the punch waste receptacle.
4) Push the saddle stitch finisher back onto the machine.
Check (Clean, replace, or adjust as necessary.)
Clean
Replace
Adjust
Lubricate
Move position
Unit name
Part name
When
calling
75K
150K 225K 300K 375K 450K
Remark
Transport section
Transport rollers
Transport paper
guides
guides
Drive section
Gears
(Specified position)
Belts
Other
Sensors
Discharge brush
Staple un
Replace UN at 100K staple.
Staple cartridge
User replacement for every 3000pcs.
[06]MAINTENANCE.fm 1 ページ 2004年4月19日 月曜日 午後1時40分
Display