Read Sharp AR-F14 (serv.man7) Service Manual online
AR-F14/PN1 MACHINE OPERATION 7-1
[7] MACHINE OPERATION
1. Staple sort mode
Collated sets of printouts are stapled and delivered to the offset tray (upper tray). Alternatively, printed paper is stapled at the center and delivered to
the saddle stitch tray (lower tray). The relation among stapling positions, orientation, paper size for stapling, and stapling capacity is shown below.
A. Saddle stitch function
Printed paper is stapled at two positions at the center and is folded in two
with the center down before delivery.
B. Punch function (only if a punch module is installed)
If the saddle stitch finisher is equipped with a punch module, printed
paper can be punched (two holes) and delivered to the offset tray. The
saddle stitch function and the punch function cannot be used together.
Stapling positions
Rear corner of
printouts
printouts
Center left two
positions of
printouts
positions of
printouts
Front corner of
printouts
printouts
Portrait orientation
Landscape orientation
Available paper sizes: 8-1/2"
x 11", A4 and B5
Stapling capacity: Up to 50
sheets for any sizes
x 11", A4 and B5
Stapling capacity: Up to 50
sheets for any sizes
Same as above
Same as above
Available paper sizes: 11" x 17",
8-1/2" x 14", 8-1/2" x 13", 8-1/2"
x 11" R, A3, B4, A4R, and B5R
Stapling capacity: Up to 50
sheets for 8-1/2" x 11"R, A4R
and B5R, and up to 25 sheets
for other sizes
8-1/2" x 14", 8-1/2" x 13", 8-1/2"
x 11" R, A3, B4, A4R, and B5R
Stapling capacity: Up to 50
sheets for 8-1/2" x 11"R, A4R
and B5R, and up to 25 sheets
for other sizes
Same as above
Same as above
Saddle stitch
Saddle stitch stapling cannot
be performed in the portrait
orientation.
be performed in the portrait
orientation.
Available paper sizes: 11" x
17", 8-1/2" x 11"R, A3, B4,
and A4R
Stapling capacity: Up to 10
sheets for any sizes
17", 8-1/2" x 11"R, A3, B4,
and A4R
Stapling capacity: Up to 10
sheets for any sizes
<Example>
<Example>
{Original 1}
{Punch positions}
{Original 2}
{Punch positions}
[07]MACHINEOPERATION.fm 1 ページ 2004年4月19日 月曜日 午後1時41分
AR-F14/PN1 MACHINE OPERATION 7-2
2. Setup by the printer driver
A. Setup procedures when the staple function is used
1) Select "PROPERTY" in the setup menu of the printer driver.
2) Click the "MAIN" tab.
3) In the "FINISH" item, select "Stapling position" and "Staple."
B. Setup procedures when the saddle stitch function is used
1) Select "PROPERTY" in the setup menu of the printer driver.
2) Click the "MAIN" tab.
3) In the "DUPLEX PRINT" items, put a check mark to the radio button of "Center binding."
4) Select between the normal-ratio center binding and 2-UP center binding.
5) In the "FINISH" item, select "2-position binding" of "STAPLE."
C. Setup procedures when the punch function is used
1) Select "PROPERTY" in the setup menu of the printer driver.
2) Click the "MAIN" tab.
3) In the "FINISH" items, put a check mark to the check box of "PUNCH."
3. Using the saddle stitch finisher functions in copy mode
Touch the [OUTPUT] key in the main screen of copy mode to display the screen for selecting saddle stitch finisher functions. Selections include the sort
function, staple sort function, saddle stitch function, group function, and output tray.
function, staple sort function, saddle stitch function, group function, and output tray.
1. [GROUP] key
Select this function to have output grouped by page.
2. [STAPLE SORT] key
Select this function to have output collated into sets and stapled.
3. [SORT] key
Select this function to have output collated into sets.
4. Icon display
When the sort, staple sort, group, or saddle stitch function is selected,
the corresponding icon appears here.
5. [OFFSET TRAY] key
Select this key to have output delivered to the offset tray. (When the
staple sort function is selected, the offset tray is automatically selected.)
staple sort function is selected, the offset tray is automatically selected.)
6. [CENTER TRAY] key
Select this key to have output delivered to the center tray.
7. [OK] key
Touch this key to close the screen and return to the main screen.
8. [OFFSET] key
When a checkmark appears, the offset function operates. When the
checkmark is removed, the offset function does not operate.
checkmark is removed, the offset function does not operate.
(The offset function does not operate when the staple sort function or the
saddle stitch function is selected.)
9. [SADDLE STITCH] key
Each set of output is stapled along the centerline of the paper and
folded.
When this function is selected, the "Pamphlet copy" function is
automatically selected.
automatically selected.
Note: When "AUTOMATIC SADDLE STITCH" is disabled in the key
operator programs, the "Pamphlet copy" is not automatically
selected.
10. [PUNCH] key
When a punch unit is installed, select this key to punch holes in the
output.
output.
*
When a function is selected, it is highlighted.
Caution: When the saddle stitch finisher is disabled in the key operator
programs, the saddle stitch finisher functions cannot be used.
OK
OUTPUT
OFFSET TRAY
OFFSET
CENTER TRAY
SADDLE
STITCH
STITCH
PUNCH
The displayed menu will vary
depending on the country and
regions.
depending on the country and
regions.
STAPLE
SORT
GROUP
SORT
[07]MACHINEOPERATION.fm 2 ページ 2004年4月19日 月曜日 午後1時41分
Display