AR-C260 (serv.man12). (9) Test Simulation - Sharp Copying Equipment Service Manual (repair manual). Page 61

Read Sharp AR-C260 (serv.man12) Service Manual online

AR-C260/C260M  SIMULATION  9 - 61
In case of an error, the following message is displayed. 
When the Flash ROM kind is improper:
 "ROM KIND ERROR" is displayed.
When an error occurs during initializing the Flash ROM:
"FLASH ERROR" is displayed.
When an error occurs during verifying:
"UPDATE ERROR" is displayed.
67
67
-01
Purpose
Operation test/check
Function 
(Purpose)
Used to check the operations of printer DRAM read/
write.
Section
Printer
Item
Operation
Operation/
Procedure
When the machine enters the simulation mode, the 
printer DRAM read/write operation check is started. 
After completion of check, "ERROR" or "MEMORY 
SIZE" is displayed. If no memory is installed, "NA" is 
displayed.
67
-11
Purpose
Setting
Function 
(Purpose)
Used to set the printer parallel I/F SELECT IN signal.
Section
Printer
Item
Operation
Operation/
Procedure
Enter the set value with the 10-key, and press the [OK] 
key. 
When a trouble occurs in communication between PC 
and the printer by use of the printer parallel I/F, change 
the setup content of this simulation.
Display
Content
Set 
range
Default
A
SELECT-IN (0:OFF 
1:ON)
Centro I/F SELECT IN 
signal YES/NO setting
0 –  1
1
67
-14
Purpose
Version up
Function 
(Purpose)
Used to perform version up of the firmware. (Printer)
Section
Firmware (Printer)
Item
Operation
Operation/
Procedure
1. When the machine enters the simulation mode, it 
enters the printer firmware version up mode at the 
same time.
67
-17
Purpose
Data clear
Function 
(Purpose)
Used to clear NVRAM. (Printer)
Section
Printer
Item
Others
Operation/
Procedure
1. Press the [EXECUTE] key. 
The confirmation message to clear is displayed. 
2. Select YES/NO to clear the NVRAM.
YES: Clear
NO: Not clear
When the printer NVRAM is normally cleared, 
"COMPLETE" is displayed. In case of an error, 
"ERROR" is displayed.
67
-18
Purpose
Data clear
Function 
(Purpose)
Used to clear the Flash data. (Printer)
Section
Printer
Item
Others
Operation/
Procedure
1. Press the [EXECUTE] key.
The confirmation message to clear the Flash data is 
displayed. 
2. Select YES/NO to clear the Flash data.
YES: Clear
NO: Not clear
When the printer Flash data are normally cleared, 
"COMPLETE" is displayed. In case of an error, 
"ERROR" is displayed.
Page of 61
Display

Download Sharp AR-C260 (serv.man12) Service Manual (Repair Manual)