AR-C260 (serv.man45). 034 Countermeasure to prevent white stripes caused by the toner cartridge - Sharp Copying Equipment Technical Bulletin (repair manual)

ar-c260 (serv.man45) technical bulletin
Model
AR-C260 (serv.man45)
Pages
6
Size
236.58 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / 034 Countermeasure to prevent white stripes caused by the toner cartridge
File
ar-c260-sm45.pdf
Date

Read Sharp AR-C260 (serv.man45) Technical Bulletin online

Sharp Electronics (UK) Ltd., Technical Services Group
CCE-279
1.General:
To solve the problem of white stripes caused by the toner cartridge, the PCU-ROM
software is modified. After completion of warm-up or printing operation, the new software
makes the developing roller rotate in a reverse direction by approximately 1.9mm to
prevent the toner from adhering to the blade in the toner cartridge. In addition, service tools
for removing toner adhering to the blade will be supplied.
2.Model Name:
AR-C260/C260M/C260P/C262M, AR-C170M/C172M
ARFR7U/FR8U/FR20U/FR19U/FR23U
3.Description:
1) Update PCU-ROM to the version presented in the table below.
3) Also, update other ROMs to the versions in the table below.
4) After updating, change value of “Q item” from “0” to “72” using Sim44-4.
Model Name
Version
ICU
PCU
SCN
OPE
BOOT
PCL
AR-C260/C260M
All
V5.22
V5.20
V5.11
V5.17
V1.9
V5.75
AR-FR7U
All
V4.31
V5.20
V5.10
V4.31
V1.9
V4.66
AR-C260P
All
V1.29
V1.40
---
---
V1.9
V8.65
AR-FR8U
All
V4.02
V1.40
---
---
---
V4.60
AR-C262M
All
V1.06
V1.10
V1.01
V1.06
V2.0
V1.58
AR-FR20U
All
V4.06
---
---
V4.06
---
V4.52
AR-C170M
ALL
V2.03
V2.10
V2.02
V2.01
V1.9
V1.35
AR-FR19U
ALL
V4.00
---
---
V4.00
---
V4.60
AR-C172M
ALL
V1.06
V1.10
V1.03
V1.06
V2.0
V1.58
AR-FR23U
ALL
V4.06
---
---
V4.06
---
V4.52
Changes : 1. Change of Specifications
1. The following changes have been implemented to cope with white stripes.
1) When the warming up and printing performance are completed, DV roller is made rotate
slightly in reverse by about 1.9mm and the accumulated toner at the pressure contact area
between the blade and DV roller in cartridge will be removed. Then toner will be prevented
from sticking to blade in toner cartridge. The item "R" has been added to Sim44-4
regarding this function.
* The setting of R = 0 (Default) means permission of reverse rotation and the setting of R =
1 means prohibition of reverse rotation.
2) The number of executions of high - density process control will be controlled when the
power is put on (includes when the power comes back from auto power shut off) and when
the machine has been left with no effect of auto power shut off.
The item "Q" has been added to Sim44-4 to set the execution timing of process control.
* The setting of Q has been changed to "72" because the setting of Q = 0 (Default) is the
same specification of function as before.
Countermeasure to prevent white stripes caused
by the toner cartridge.
TECHNICAL BULLETIN
Date:
31 May 2006
Model: 
ARC260
Ref.:
034
Colour: 
White
Page:
1 of 1
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-279
 
Before beginning to clean a toner cartridge, make prints of single-colour BK, C, M, and Y respectively using
Sim64-1: A-7, B-255, and C-1 to check for white stripes.
If no white stripes are shown, cleaning is unnecessary. If white stripes appear, perform the following cleaning
process:
Jigs:
Pull out the toner cartridge from the unit, and return the toner on developing roller to the hopper.
1)-1 Check that the black dot position of the agitation gear is at the top.
If the position is displaced, insert the gear in the developing roller coupling and turn it clockwise so that the
black dot comes to the top.
Note: If the black dot is not at the top, the sheet mounted on the agitator on the hopper side comes to the
position at the joint between the hopper and the tub. It does not allow toner to move to the hopper side
when the toner cartridge is held upside down. Be sure to check the position of the black dot.
1)-2 Hold the toner cartridge upside down in the middle, and move the cartridge up and down like a seesaw
for several times.
Note 1: Holding the cartridge upside down lets the toner fall from the waste toner box. Provide a sheet of
paper to catch the falling toner.
Note 2: Do not touch the developing roller and the 2nd blades. (It may cause a failure in imaging.)
2) To return toner to the hopper side further, turn the toner level detection lever clockwise or counter
clockwise until it stops, and then turn the lever in reverse direction until it stops. Repeat this action for 4 to 5
times. (Turn the lever until clicks are heard.)
Note 1: Note that toner may fall from the cartridge.
Note 2: Be sure to take steps 1) and 2). (Skipping these steps may cause leakage of toner from both sides of
the developing roller.)
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-279
3) Holding the cartridge upside down, lightly tap the 5 screws of the doctor blade 4 times respectively (a total
of 20 times), using a screwdriver.  (Let the toner adhering to the doctor blade fall off.)
Note: Note that toner may fall from the cartridge.
4) To prevent the toner  in steps 1, 2, and 3 from returning to the developing roller to clean, place the
cartridge upside down so that the developing roller faces the operator. Then remove two screws outside and
remove the developing roller cover.
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-279
5) Insert the 2nd blade cleaning jig in the middle of the developing roller, and then slightly lift the 2nd blade,
and insert the tip of the 1st blade cleaning jig beside the 2nd blade cleaning jig. Then pull out the 2nd
blade cleaning jig, and insert the 1st blade cleaning jig until it stops. (To smoothly insert the 1st blade
cleaning jig slanted against the developing roller.)
Note 1: Push in the jig until it hits the frame vertically.
Note 2: Because a black toner cartridge does not have a 2nd blade, a 2nd blade cleaning jig is unnecessary.
6) Slide the jig to the left and right for 5 round trips, cleaning the 1st blade.
Note 1: When removing the jig, pull it using the bottom as a support. (Remove from the middle of the
developing roller.)
Note 2: Use one jig for a maximum of 8 times, 5 times in each process. Do not overuse the jig.
Note 3. To avoid mixing of colours, wipe the 1st blade cleaning jig after use using a dry waste cloth.
7) Placing the upper part of toner cartridge down, insert the gear to the developing roller coupling and turn the
gear counter clockwise by approximately 1/3 turn. (From the chin part to the tip of 2nd blade.)
Note: Do not lift the toner hopper. (It may move toner to the developing roller side.)
Page of 6
Display

Download Sharp AR-C260 (serv.man45) Technical Bulletin

Here you can read online and download Sharp AR-C260 (serv.man45) Technical Bulletin in PDF. AR-C260 (serv.man45) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-C260 (serv.man45) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.