Read Sony MHS-TS55 (serv.man2) Service Manual online
MHS-TS55_ADJ
5-6
5-3-5. Dark DP Adjustment
The Dark DP (Dead Pixel) adjustment order is as follows.
Note:
Perform this adjustment after those performed in 5-3-3 to 5-3-4.
Perform this adjustment after those performed in 5-3-3 to 5-3-4.
Small pattern box (PTB-1450) setting:
Color temperature = 3100 ± 200K
Luminance: LV12.2 ± 0.5
Color temperature = 3100 ± 200K
Luminance: LV12.2 ± 0.5
The adjustment is finished normally.
Fig.
5-3-13
The adjustment is complete.
The adjustment is finished abnormally.
Fig.
5-3-14
Malfunction of Dark DP
adjustment result
adjustment result
5-3-6. Light/S.S Adjustment
The Light/S.S (Light Dead Pixel/Slow Shutter Dead Pixel)
adjustment order is as follows.
adjustment order is as follows.
Note 1:
Perform this adjustment after those performed in 5-3-3 to 5-3-5.
Note 2:
Select [MENU] - [Main Settings] - [LUN Settings (USB)] and confirm that [Multi]
is selected. If [Single] is selected, the adjustment does not succeed.
Perform this adjustment after those performed in 5-3-3 to 5-3-5.
Note 2:
Select [MENU] - [Main Settings] - [LUN Settings (USB)] and confirm that [Multi]
is selected. If [Single] is selected, the adjustment does not succeed.
The adjustment is finished normally.
Fig.
5-3-16
The adjustment is complete.
The adjustment is finished abnormally.
Fig.
5-3-17
Malfunction of Light/S.S
adjustment result
adjustment result
* F
Confirm the indication
on the screen.
Finished abnormally.
Finished normally.
In case of the adjustment is finished abnormally,
the following indication appears on the screen.
(Fig. 5-3-14)
In this case, confirm the adjusting environment
and readjust.
the following indication appears on the screen.
(Fig. 5-3-14)
In this case, confirm the adjusting environment
and readjust.
Touch the Left area, Right area, or the Top area, Bottom area on the LCD screen to choose an adjustment item.
Select “ Dark DPC (LV10)”, and touch the Center area on the LCD screen.
Select “OK”, and touch the Center area of the LCD screen to start.
* If the adjustment is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the adjustment. (Page 5-3)
Select “ Dark DPC (LV10)”, and touch the Center area on the LCD screen.
Select “OK”, and touch the Center area of the LCD screen to start.
* If the adjustment is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the adjustment. (Page 5-3)
In case of the adjustment is finished normally,
the adjustment completion indication appears
on the screen. (Fig. 5-3-13)
Press the
the adjustment completion indication appears
on the screen. (Fig. 5-3-13)
Press the
(Shutter) button
to return to
adjustment menu.
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
Place the camera in front of the Small pattern box (PTB-1450). (Fig. 5-3-12)
Restart the camera.
Confirm the indication
on the screen.
Finished abnormally.
Finished normally.
In case of the adjustment is finished abnormally,
the following indication appears on the screen.
(Fig. 5-3-17)
In this case, confirm the adjusting environment
and make adjustment again from "5-3-5. Dark
DP Adjustment."
the following indication appears on the screen.
(Fig. 5-3-17)
In this case, confirm the adjusting environment
and make adjustment again from "5-3-5. Dark
DP Adjustment."
Touch the Left area, Right area, or the Top area, Bottom area on the LCD screen to choose an adjustment item.
Select “Light S.S (BLACK)”, and touch the Center area on the LCD screen.
Select “OK”, and touch the Center area of the LCD screen to start.
*1 If the adjustment is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the adjustment. (Page 5-3)
*2 It may take more than 3 hours on this adjustment depending on the environments and the battery conditions.
Select “Light S.S (BLACK)”, and touch the Center area on the LCD screen.
Select “OK”, and touch the Center area of the LCD screen to start.
*1 If the adjustment is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the adjustment. (Page 5-3)
*2 It may take more than 3 hours on this adjustment depending on the environments and the battery conditions.
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
Confirm that the unit has entered the Adjustment mode, and tthen connect the USB charging adaptor.
Cover camera lens (All black) (Fig. 5-3-15)
Restart the camera.
In case of the adjustment is finished normally,
the adjustment completion indication appears
on the screen. (Fig. 5-3-16)
Press the
the adjustment completion indication appears
on the screen. (Fig. 5-3-16)
Press the
(Shutter) button
to return to
adjustment menu.
Adjustment order
Screen display
Adjustment order
Screen display
Small pattern box
(PTB-1450)
(PTB-1450)
5 mm or less
Black cloth
Camera
Equipments required: Small pattern box (PTB-1450)
Cover camera lens and
Small pattern box (PTB-1450)
Small pattern box (PTB-1450)
(All black)
Clear chart
Fig.
5-3-12
Equipments required: Cover camera lens
(All black)
Camera
Black cloth
Fig.
5-3-15
Click on the first or last page to see other MHS-TS55 (serv.man2) service manuals if exist.