Read Sony MHS-TS55 (serv.man2) Service Manual online
MHS-TS55_ADJ
5-8E
DESTINA
TION
AREA
SELECTABLE LANGUAGE
HDMI Output
Default
Japanese
English
French
German
Spanish
Italian
Portuguese
Simplified Chinese
T
raditional Chinese
Arabic
Dutch
Russian
Swedish
Korean
Norwegian
Danish
Finnish
Polish
Hungarian
Czech
Persian
Thai
Greek
T
urkish
Malay
Croatian
Romanian
Indonesian
Bulgarian
V
ietnamese
U
US
z
60i (60Hz)
z
: INITIAL LANGUAGE
The setting is finished normally.
Fig.
5-3-23
The setting is complete.
The setting is finished abnormally.
Fig.
5-3-24
Malfunction of Set
Language destination result
Language destination result
Example:
Connect USB NG!!
Connect USB NG!!
Fig.
5-3-25
Malfunction of Set
Language destination result
Language destination result
Example:
SERIAL No Length ERROR!!
SERIAL No Length ERROR!!
The Language destination setting order is as follows.
Setting order
Confirm the indication
on the screen.
Press the “Read” button, “PRODUCT CODE” and “SERIAL No.” will displayed on the screen.
Select the correspond language destination from the pull-down menu, input the “SERIAL No.”, then press the “Write” button.
*1 The “SERIAL No.” is written on the side of the camera.
Select the correspond language destination from the pull-down menu, input the “SERIAL No.”, then press the “Write” button.
*1 The “SERIAL No.” is written on the side of the camera.
*2 Once the Language destination setting is finished, it cannot be reset.
Disconnect the USB connection, turn on
the power of the camera, and then perform
the initial setting.
the power of the camera, and then perform
the initial setting.
In case of the setting is finished normally,
the setting completion indication appears on
the screen. (Fig. 5-3-23)
The power of the camera turns off automatically.
the setting completion indication appears on
the screen. (Fig. 5-3-23)
The power of the camera turns off automatically.
In case of the setting is finished abnormally,
the following message appears on the screen.
(Fig. 5-3-24, 5-3-25)
In this case, perform the setting again upon
the message.
the following message appears on the screen.
(Fig. 5-3-24, 5-3-25)
In this case, perform the setting again upon
the message.
Finished abnormally.
Finished normally.
Screen display
Selectable language table
