Read Sony MHS-TS55 (serv.man2) Service Manual online
MHS-TS55_ADJ
5-3
5-2. MB/LCD FUNCTION CHECK
The MB (Main Board)/LCD function check order is as follows.
Handling of 9 Colors Chart
When performing adjustments using the 9 colors chart, insert the
transparent window in the lower right position. (Fig. 5-2-1)
When performing adjustments using the 9 colors chart, insert the
transparent window in the lower right position. (Fig. 5-2-1)
Small pattern box
9 colors chart
Transparent window
Fig.
5-2-1
If NG appears for more than one check item, confirm the adjusting
environment and recheck.
environment and recheck.
1) Check that the camera is on the adjustment mode.
Note:
For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
2) Place the camera in front of the Small pattern box (PTB-1450). (Fig. 5-2-2)
3) Touch the Left area, Right area, or the Top area, Bottom area on the LCD screen to choose an adjustment item.
Select “MB/LCD”, and touch the Center area on the LCD screen. Select “OK”, and touch the Center area of the LCD screen to start.
Note:
If the check is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the check. (Page 5-3)
4) Confirm the indication on the screen.
If OK appears for all check items, press the (Shutter) button to
return to adjustment menu. (Fig. 5-2-3)
return to adjustment menu. (Fig. 5-2-3)
Function check items
Item
Description
RTC
Compare Crystal RTC time and OS time. If Crystal RTC time and OS time are the same, conform to spec.
Video
REC/PLAY Video file and check MIC and SPK are working.
Memory
Check Internal memory size, conform to spec.
5-1-5. Setting the Adjustment Mode
1) Download the adjustment tool “ADJ_Tool_TS55_Ver[][][].zip” from the TISS homepage.
Uncompress the “ADJ_Tool_TS55_Ver[][][].zip”, then confirm that it includes the following items.
•
EnableTest.txt
• USB Driver (Folder)
• Service Tool (Folder)
The above two folders “USB Driver” and “Service Tool” are used in “5-3-8. Set Language Destination” (Page 5-7).
2) Save the uncompressed file “EnableTest.txt” in the root directory of the removable disk named “BLOGGIE”.
Note:
Saving it in the other directory may cause the malfunction of program.
If “EnableTest.txt” is still remained after the adjustment, delete it.
3) Select [MENU] - [Main Settings] - [LUN Settings (USB)] and confirm that [Multi] is selected. If [Single] is selected, the adjustment does not
succeed.
4) With the camera turned off.
5) Keep pressing (Shutter) button and ON/OFF (Power) button simultaneously for a while until the adjustment mode screen appears.
6) After a few seconds, the adjustment mode screen will appear on the LCD screen. (Fig. 5-1-4)
7) Press the (Shutter) button, the initial screen for the adjustment mode will appear. (Fig. 5-1-5)
Fig. 5-1-4 Fig. 5-1-5
5-1-6. Enabling the Adjustment
The item that has been adjusted may be disabled to be readjusted.
If the readjustment is required, or when replacin
If the readjustment is required, or when replacin
g Lens Module, it is necessary to enable the adjustment upon the following procedure.
1) Touch the Left area, Right area, or the Top area, Bottom area on the LCD screen to choose an adjustment item.
2) Press the (Shutter) button.
3) Touch the Top area or Bottom area on the LCD screen to choose a Disable item.
4) Touch the Left area or Right area on the LCD screen.
(Disable
(Disable
“001”
→ Disable “000”) (Fig. 5-1-6)
5) Press the (Shutter) button or touch the Center area on the LCD screen.
Example: For MB/LCD
Fig.
5-1-6
Fig.
5-2-3
Small pattern box
(PTB-1450)
(PTB-1450)
5 mm or less
Black cloth
Camera
Equipments required: Small pattern box (PTB-1450)
Cover camera lens and
Small pattern box (PTB-1450)
Small pattern box (PTB-1450)
(All black)
9 colors chart
Fig.
5-2-2
Click on the first or last page to see other MHS-TS55 (serv.man2) service manuals if exist.