Read Sony HDR-FX1 / HDR-FX1E (serv.man9) Service Manual online
— 23 —
HDR-FX1/FX1E
Before change
After change
Page 6-50
1-4.
COLOR ELECTRONIC VIEWFINDER
SYSTEM ADJUSTMENT
SYSTEM ADJUSTMENT
4. VCOM Level Adjustment (VC-367 board)
Adjusting method:
Order Page Address Data
Procedure
1
0
01
01
Set the data.
2
C
36
Change the data and set the DC
voltage (A) to the specified value.
voltage (A) to the specified value.
3
C
36
Press PAUSE button.
4
0
01
00
Set the data.
Adjusting method:
Order Page Address Data
Procedure
1
0
01
01
Set the data.
2
C
36
Change the data and set the DC
voltage (A) to the specified value.
(The data should be “00” to “3F”.)
voltage (A) to the specified value.
(The data should be “00” to “3F”.)
3
C
36
Press PAUSE button.
4
0
01
00
Set the data.
Page 6-51
6. Contrast Adjustment (VC-367 board)
Mode
Camera, HDV1080i and DV
Subject
Arbitrary
Measurement Point
Pin 9 of CN107 of DA-033 board
(EVF VG)
(EVF VG)
Measuring Instrument
Oscilloscope
Adjustment Page
C
Adjustment Address
3C, 77
Specified Value
A = 2.57
±
0.05V
Mode
Camera, HDV1080i and DV
Subject
Arbitrary
Measurement Point
Pin 9 of CN107 of DA-033 board
(EVF VG)
(EVF VG)
Measuring Instrument
Oscilloscope
Adjustment Page
C
Adjustment Address
3C, 77
Specified Value
A = 2.70
±
0.05V
Page 6-65
: Changed portion
: Added portion
6-3. VIDEO SECTION ADJUSTMENT
3-4.
VIDEO SYSTEM ADJUSTMENTS
1. S VIDEO OUT Y Level Adjustment (VC-367 Board)
Note3: [ ]: PAL model with the version 2.0 mechanism control
microprocessor (VC-367 board IC8801). (Refer to “1-2-2.
INITIALIZATION OF 8, C, 13, 18, 1C PAGE DATA” for version
check of the mechanism control microprocessor.)
INITIALIZATION OF 8, C, 13, 18, 1C PAGE DATA” for version
check of the mechanism control microprocessor.)
2. S VIDEO OUT Chroma Level Adjustment
(VC-367 Board)
Note3: [ ]: PAL model with the version 2.0 mechanism control
microprocessor (VC-367 board IC8801). (Refer to “1-2-2.
INITIALIZATION OF 8, C, 13, 18, 1C PAGE DATA” for version
check of the mechanism control microprocessor.)
INITIALIZATION OF 8, C, 13, 18, 1C PAGE DATA” for version
check of the mechanism control microprocessor.)
Note3: [ ]: PAL model with the version 2.0 or later mechanism control
microprocessor (VC-367 board IC8801). (Refer to “1-2-2.
INITIALIZATION OF 8, C, 13, 18, 1C PAGE DATA” for version
check of the mechanism control microprocessor.)
INITIALIZATION OF 8, C, 13, 18, 1C PAGE DATA” for version
check of the mechanism control microprocessor.)
Note3: [ ]: PAL model with the version 2.0 or later mechanism control
microprocessor (VC-367 board IC8801). (Refer to “1-2-2.
INITIALIZATION OF 8, C, 13, 18, 1C PAGE DATA” for version
check of the mechanism control microprocessor.)
INITIALIZATION OF 8, C, 13, 18, 1C PAGE DATA” for version
check of the mechanism control microprocessor.)
Before change
After change
Note3: For PAL model, the S VIDEO OUT Y/chroma level adjustment
addresses are changed by the version of the mechanism control
microprocessor (VC-367 board IC8801). So, check the version of
the mechanism control microprocessor before performs the
adjustments.
microprocessor (VC-367 board IC8801). So, check the version of
the mechanism control microprocessor before performs the
adjustments.
How to check the version of the mechanism control microprocessor:
Order Page Address Data
Procedure
1
0
10
00
Set the data.
2
3
FF
The data shows the version of the
mechanism control microprocessor.
10: Ver. 1.0 (MP1)
20: Ver. 2.0 (MP2)
30: Ver. 3.0 (MP3)
40: Ver. 4.0 (MP4)
50: Ver. 5.0 (MP5)
60: Ver. 6.0 (MP6)
mechanism control microprocessor.
10: Ver. 1.0 (MP1)
20: Ver. 2.0 (MP2)
30: Ver. 3.0 (MP3)
40: Ver. 4.0 (MP4)
50: Ver. 5.0 (MP5)
60: Ver. 6.0 (MP6)
: Added portion
Click on the first or last page to see other HDR-FX1 / HDR-FX1E (serv.man9) service manuals if exist.