Read Sony HDR-FX1 / HDR-FX1E (serv.man9) Service Manual online
— 16 —
HDR-FX1/FX1E
Before change
After change
Page 6-13
Added contents
Page 6-13
4. 1D Page Table
Note1: When reading or writing the 1D page data, select page: 0, address:
10, and set data: 01, then select D page. The 1D page can be chosen
by this data setting.
After reading or writing, reset the data of page: 0, address: 10 to
“00”.
by this data setting.
After reading or writing, reset the data of page: 0, address: 10 to
“00”.
Note2: The data of page: 0, address: 10 must be “00”.
Note3: Fixed data-1: Initialized data. (Refer to “1. Initializing the 9, 1D
Note3: Fixed data-1: Initialized data. (Refer to “1. Initializing the 9, 1D
Page Data”.)
Fixed data-2: Modified data. (Refer to “2. Modification of 9, 1D
Page Data”).
Fixed data-2: Modified data. (Refer to “2. Modification of 9, 1D
Page Data”).
Table. 6-1-12.
Address
00 to FF
Remark
Fixed data-1
4. 1D Page Table
4-1. 1D Page Table (SP Control Microprocessor Version
4-1. 1D Page Table (SP Control Microprocessor Version
1.0 (MP1) to Version 3.0 (MP3))
Note1: When reading or writing the 1D page data, select page: 0, address:
10, and set data: 01, then select D page. The 1D page can be chosen
by this data setting.
After reading or writing, reset the data of page: 0, address: 10 to
“00”.
by this data setting.
After reading or writing, reset the data of page: 0, address: 10 to
“00”.
Note2: The data of page: 0, address: 10 must be “00”.
Note3: Fixed data-1: Initialized data. (Refer to “1. Initializing the 9, 1D
Note3: Fixed data-1: Initialized data. (Refer to “1. Initializing the 9, 1D
Page Data”.)
Fixed data-2: Modified data. (Refer to “2. Modification of 9, 1D
Page Data”).
Fixed data-2: Modified data. (Refer to “2. Modification of 9, 1D
Page Data”).
Table. 6-1-12 (1).
Address
00 to FF
Remark
Fixed data-1
4-2. 1D Page Table (SP Control Microprocessor Version
4.0 (MP4))
Note1: When reading or writing the 1D page data, select page: 0, address:
10, and set data: 01, then select D page. The 1D page can be chosen
by this data setting.
After reading or writing, reset the data of page: 0, address: 10 to
“00”.
by this data setting.
After reading or writing, reset the data of page: 0, address: 10 to
“00”.
Note2: Fixed data-1: Initialized data. (Refer to “1. Initializing the 9, 1D
Page Data”.)
Fixed data-2: Modified data. (Refer to “2. Modification of 9, 1D
Page Data”).
Fixed data-2: Modified data. (Refer to “2. Modification of 9, 1D
Page Data”).
Note3: When the SP control microprocessor is replaced, check that the
data of the fixed data address shown in the table is the initial value.
If not, change the data to the initial value.
If not, change the data to the initial value.
Address
Remark
Initial value
Address
Remark
Initial value
00 to 2C
2D
2E
2F to F3
F4
F5 to FF
00
00
B4
Fixed data-1
Fixed data (Note3)
Fixed data-1
Fixed data (Note3)
Fixed data-1
Table. 6-1-12 (2).
4-3. 1D Page Table (SP Control Microprocessor Version
5.0 (MP5))
Note1: When reading or writing the 1D page data, select page: 0, address:
10, and set data: 01, then select D page. The 1D page can be chosen
by this data setting.
After reading or writing, reset the data of page: 0, address: 10 to
“00”.
by this data setting.
After reading or writing, reset the data of page: 0, address: 10 to
“00”.
Note2: Fixed data-1: Initialized data. (Refer to “1. Initializing the 9, 1D
Page Data”.)
Fixed data-2: Modified data. (Refer to “2. Modification of 9, 1D
Page Data”).
Fixed data-2: Modified data. (Refer to “2. Modification of 9, 1D
Page Data”).
Note3: When the SP control microprocessor is replaced, check that the
data of the fixed data address shown in the table is the initial value.
If not, change the data to the initial value.
If not, change the data to the initial value.
Address
Remark
Initial value
Address
Remark
Initial value
00 to 2C
2D
2E
2F to F3
F4
F5 to FF
E7
F9
B4
Fixed data-1
Fixed data (Note3)
Fixed data-1
Fixed data (Note3)
Fixed data-1
Table. 6-1-12 (3).
: Changed portion
: Added portion
Click on the first or last page to see other HDR-FX1 / HDR-FX1E (serv.man9) service manuals if exist.