HDR-FX1, HDR-FX1E (serv.man9) - Sony Movie Service Manual (repair manual)

hdr-fx1, hdr-fx1e (serv.man9) service manual
Model
HDR-FX1 HDR-FX1E (serv.man9)
Pages
25
Size
316.73 KB
Type
PDF
Document
Service Manual
Brand
Device
Movie / SUPPLEMENT-2 ADJUSTMENTS
File
hdr-fx1-hdr-fx1e-sm9.pdf
Date

Read Sony HDR-FX1 / HDR-FX1E (serv.man9) Service Manual online

Sony EMCS Co.
2006G1600-1
  ©2006.07
Published by Kohda TEC
9-876-770-89
SERVICE MANUAL
SUPPLEMENT-2
File this supplement-2 with the service manual.
Ver. 1.3  2006. 07
• Change of adjustments
HDR-FX1/FX1E
SECTION 6
ADJUSTMENTS
ADJ
HDR-FX1/FX1E
RMT-840
This SUPPLEMENT-2 is the revised version
of SUPPLEMENT-1.
Replace the SUPPLEMENT-1 (9-876-770-83)
with the SUPPLEMENT-2.
— 2 —
HDR-FX1/FX1E
     Replaced parts
       Parts replacement
*3
*2
*1
VC-367 board  IC1101, X1101,
 X1102 (T
iming gener
ator)
VC-367 board  IC1104 to 1106 (A
GC,
 A/D con
v.)
VC-367 board  IC1902 (Camera control micro processor)
VC-367 board  IC2021 (Base band process, etc.)
VC-367 board  IC4001 (D
V signal pr
ocess,RF signal process)
VC-367 board  IC6001 (RGB dr
iv
er (EVF))
VC-367 board  IC6002 (T
iming generator (EVF))
VC-367 board  IC8601 (SP(LSI) control micro processor)
VC-367 board  
IC8801 (Mechanism control micro processor)
Adjustment
Section
Initialization of
8,9,A,B,C,D,E,F,13,
14,18,19,1A,1B,1C,
1D,1E,1F page data
Adjustment
Initialization of A, B, D, 1A,1B page data
Initialization of 8, C, 13, 18, 1C page data
Initialization of 9, 1D page data
Initialization of E, F, 14, 19, 1E, 1F page data
1.
Before starting adjustment
1-1. Adjusting items when replacing main parts and boards.
• Adjusting items when replacing main parts
Table. 6-1-1(1).
     Replaced parts
       Parts replacement
VC-367 board  IC1101, X1101,
 X1102 (T
iming gener
ator)
VC-367 board  IC1104 to 1106 (A
GC,
 A/D con
v.)
VC-367 board  IC2021 (Base band process, etc.)
VC-367 board  IC4001 (D
V signal pr
ocess,RF signal process)
VC-367 board  IC6001 (RGB dr
iv
er (EVF))
VC-367 board  IC6002 (T
iming generator (EVF))
Adjustment
Section
Initialization of
8,9,A,B,C,D,E,F,13,
14,18,19,1A,1B,1C,
1D,1E,1F page data
Adjustment
Initialization of A, B, D, 1A,1B page data
Initialization of 8, C, 13, 18, 1C page data
Initialization of 9, 1D page data
Initialization of E, F, 14, 19, 1E, 1F page data
Page
Before change
6-2
After change
Table. 6-1-1(1).
 : Added portion
Added contents
6-3
*1: When the camera control microprocessor is replaced, check that the data of page: 1E, address: D7 is the initial value. If
not, change the data to the initial value. (Refer to Table 6-1-17. “1E Page Table”.)
*2: When the SP (LSI) control microprocessor is replaced, check that the fixed data are corresponding to the version of the
microprocessor. (Refer to “1-2-3. Initialization of 9, 1D page data”.)
*3: When the Mechanism control microprocessor is replaced, check that the fixed data are corresponding to the version of
the microprocessor. (Refer to “1-2-2. Initialization of 8, C, 13, 18, 1C page data”.)
— 3 —
HDR-FX1/FX1E
Before change
After change
Page 6-7
6-1. CAMERA SECTION ADJUSTMENT
10. MENU settings
CAMERA SET menu
STEADY SHOT ....................................................... OFF
IN/OUT REC. menu
REC FORMAT .............................................. HDV1080i
COMPONENT ....................................................... 1080i
TV TYPE .................................................................. 16:9
10. PICTURE PROFILE switch (MK-017 board) ................. OFF
11. MENU settings
CAMERA SET menu
STEADY SHOT ....................................................... OFF
IN/OUT REC. menu
REC FORMAT .............................................. HDV1080i
COMPONENT ....................................................... 1080i
TV TYPE .................................................................. 16:9
Page 6-8
1-1.
PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION)
1-1-3.
Precaution
1. Setting the Switch
Address
Remark
Initial value
Address
Remark
Initial value
00 to 0F
10
11 to 17
18
19 to 2E
2F
30
31
32 to FF
00
Test mode
Fixed data-1
Fixed data-2
Fixed data-1
Fixed data-2
Fixed data-1
Fixed data-2
Fixed data-1
Table. 6-1-2.
1-2.
INITIALIZATION OF 8, 9, A, B, C, D, E, F, 13,
14, 18, 19, 1A, 1B, 1C, 1D, 1E, 1F PAGE DATA
1-2-1.
INITIALIZATION OF A, B, D, 1A, 1B PAGE DATA
3. A Page Table
Address
Remark
Initial value
Address
Remark
Initial value
00 to 0F
10
11 to 17
18
19 to 2E
2F
30
31
32 to CF
D0
D1
D2
D3 to D4
D5
D6
D7
D8
D9
DA to FF
00
Test mode
Fixed data-1
Fixed data-2
Fixed data-1
Fixed data-2
Fixed data-1
Fixed data-2
Fixed data-1
Fixed data-2
(Modified data. Copy the data
built in the same model.)
Fixed data-1
Fixed data-2
(Modified data. Copy the data
built in the same model.)
Fixed data-1
Fixed data-2
Fixed data-1
Table. 6-1-2.
Page 6-9
5
. D  Page  Table
Address
33
34 to 56
57
Remark
Fixed data-2
Fixed data-1
Fixed data-2
Table. 6-1-4.
Address
33
34 to 44
45
46 to 56
57
Remark
Fixed data-2
Fixed data-1
Fixed data-2
Fixed data-1
Fixed data-2
Table. 6-1-4.
 : Changed portion   
 : Added portion
— 4 —
HDR-FX1/FX1E
Before change
After change
Page 6-7
Page 6-10
6
. 1A Page Table
Address
D9
DA to D0
DE
Remark
Fixed data-2
Fixed data-1
Fixed data-2
Address
D9
DA to DD
DE
Remark
Fixed data-2
Fixed data-1
Fixed data-2
Table. 6-1-5.
Table. 6-1-5.
1-2-2.
INITIALIZATION OF 8, C, 13, 18, 1C PAGE DATA
2. Modification of 8, C, 13, 18, 1C Page Data
If the 8, C, 13, 18, 1C page data has been initialized, change the
data of the “Fixed data-2” address shown in the following table by
manual input.
Version check of the mechanism control microprocessor:
(VC-367 board IC8801)
Order Page Address Data
Procedure
1
0
10
00
Set the data.
2
3
FF
The data shows the version of the
mechanism control
microprocessor.
10: Ver. 1.0 (MP1)
20: Ver. 2.0 (MP2)
Note:
For PAL model, the S VIDEO OUT Y/chroma level adjustment
addresses are changed by the version of the mechanism control
microprocessor. (Refer to “4. C Page Table”.)
2. Modification of 8, C, 13, 18, 1C Page Data
If the 8, C, 13, 18, 1C page data has been initialized, change the
data of the “Fixed data-2” address shown in the following table
corresponding to the mechanism control microprocessor’s version
by manual input.
Version check of the mechanism control microprocessor:
(VC-367 board IC8801)
Order Page Address Data
Procedure
1
0
10
00
Set the data.
2
3
FF
The data shows the version of the
mechanism control
microprocessor.
10: Ver. 1.0 (MP1)
20: Ver. 2.0 (MP2)
30: Ver. 3.0 (MP3)
40: Ver. 4.0 (MP4)
50: Ver. 5.0 (MP5)
60: Ver. 6.0 (MP6)
70: Ver. 7.0 (MP7)
80: Ver. 8.0 (MP8)
Note: For PAL model, the S VIDEO out Y/chroma level adjustment
addresses are changed by the version of the mechanism control
microprocessor. (Refer to “4. C Page Table”.)
Page 6-11
3. 8 Page Table
Note1: The data of page: 0, address: 10 must be “00”.
Note2: Fixed data-1: Initialized data. (Refer to “1. Initializing the 8, C,
13, 18, 1C Page Data”.)
Fixed data-2: Modified data. (Refer to “2. Modification of 8, C,
13, 18, 1C Page Data”).
Address
00 to 7D
D4 to FF
Remark
Fixed data-1
Fixed data-1
Table. 6-1-6.
3. 8 Page Table
3-1. 8 Page Table (Mechanism Control Microprocessor
Version 1.0 (MP1) to Version 3.0 (MP3))
Note1: The data of page: 0, address: 10 must be “00”.
Note2: Fixed data-1: Initialized data. (Refer to “1. Initializing the 8, C,
13, 18, 1C Page Data”.)
Fixed data-2: Modified data. (Refer to “2. Modification of 8, C,
13, 18, 1C Page Data”).
Address
00 to 7D
D4 to FF
Remark
Fixed data-1
Fixed data-1
Table. 6-1-6 (1).
 : Changed portion   
 : Added portion
Page of 25
Display

Download Sony HDR-FX1 / HDR-FX1E (serv.man9) Service Manual (Repair Manual)

Here you can read online and download Sony HDR-FX1 / HDR-FX1E (serv.man9) Service Manual in PDF. HDR-FX1 / HDR-FX1E (serv.man9) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony HDR-FX1 / HDR-FX1E (serv.man9) Movie. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.