Read Sharp MX-PE10 FIERY (serv.man45) Technical Bulletin online
Page 6 of 8
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
2 Functionality to access to digital contents stored on copy-protected read-only media
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
©2012 Electronics For Imaging
Customer Support
Release Note
• FIT191578: Request to Change of SHARP logo on Webtool page
1) Check SHARP logos on both CWS and the Webtool pages:
Results:
All the SHARP logos are replaced with the one with registered mark
• FIT38810: [POPO] Remove paper from finisher Upper&lower tray msg did not
go even after clearing the output trays
1) Print a 5000pg test file to default output tray.
2) The Finisher Upper tray gets full first, after which the offset happens, outputs
2) The Finisher Upper tray gets full first, after which the offset happens, outputs
start getting ejected out to the Finisher Lower tray, finisher lower tray also
gets filled.
gets filled.
3) Check the engine LCD and CWS Errors and Alerts: It shows 'Remove paper
from Finisher Upper and Lower Trays'.
4) Clear the outputs from these trays.
Results: The job resumes printing to the Finisher Upper tray, but the message
still stays.
still stays.
• FIT38568: Color separation issue observed while printing large job with mixed
paper size & color & b/w data
1) Install PS driver and set to Raw 9101 port in client PC.
2) Send 100 jobs of 100-pages mixed size (Letter&11x17) job PDF file via PS
driver-Direct queue
3) Put only 1000 Letter size sheets paper in tray 1, and 1000 sheets 11x17 paper
size in LCT tray
4) After 'load paper' message pops-up, put another 1000 Letter and 1000 11x17
sheets paper in trays and accordingly
5) Repeat step 4 until the whole job completes printing
2) Send 100 jobs of 100-pages mixed size (Letter&11x17) job PDF file via PS
driver-Direct queue
3) Put only 1000 Letter size sheets paper in tray 1, and 1000 sheets 11x17 paper
size in LCT tray
4) After 'load paper' message pops-up, put another 1000 Letter and 1000 11x17
sheets paper in trays and accordingly
5) Repeat step 4 until the whole job completes printing
Results: Color registration issue observed while printing. This is mostly seen on
B/W Letter Landscape pages where "Color 11x17 Portrait" text is printed in Cyan
and Yellow color. The original color of the text on Color 11x17 pages is Green.
B/W Letter Landscape pages where "Color 11x17 Portrait" text is printed in Cyan
and Yellow color. The original color of the text on Color 11x17 pages is Green.
• FIT156263: Fake Paper jam/Misfed message showed in CWS while there is no
Jam or Misfed on the Engine LCD or Engine paper path
1) Import test file core_10_b.pdf (1082pages) to CWS Hold queue.
Click on the first or last page to see other MX-PE10 FIERY (serv.man45) service manuals if exist.