Read Sharp MX-PE10 FIERY (serv.man45) Technical Bulletin online
Page 4 of 8
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
2 Functionality to access to digital contents stored on copy-protected read-only media
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
©2012 Electronics For Imaging
Customer Support
Release Note
1.A message shown on OPE in Procedure 8(remove printed paper) should
be shown after Procedure 6
2.The error message of CWS shouldn't remain after recovery
【Procedure B】(1~4 is same as Procedure A)
1. Open word file of Letter LEF 24 page(Portrait)
2. Print with below driver settings
Media tab
be shown after Procedure 6
2.The error message of CWS shouldn't remain after recovery
【Procedure B】(1~4 is same as Procedure A)
1. Open word file of Letter LEF 24 page(Portrait)
2. Print with below driver settings
Media tab
⇒Paper size...Letter SEF
Finishing tab
⇒Staple mode...Saddle stitch
3.(24~22page) is outputted with saddle fold+staple
4.When completing print till job (21~2 page), an error message of "20
Copies is Staple max. Continue without Stapling?" is on OPE
5. Select "Cancel" in error message
6. Resume print and print of remaining data 1st page is canceled then print till
(21~2 page)is outputted with saddle fold+staple
7. An error message of "Please Remove paper from the Saddle stapler
compiler" is shown on CWS
【Issue】
An error message of CWS remains
【Expected behavior】
The error message of CWS doesn't remain after completing printing (cancel
the remaining data)
【Additional information】
・After Procedure, normal print and saddle fold+staple print can be done with
error display in CWS but an error message remains.
・When executing 48 page data by PolarisPro without Fiery by using SHARP
driver set as Multi-sheet Fold-Staple, 1~40 page(20 paper) is outputted first
then same error message as procedure 4 is shown, by selecting "Continue"
remaining data is printed and outputted to offset tray, by selecting "Cancel"
remaining data is not printed but canceled.
4.When completing print till job (21~2 page), an error message of "20
Copies is Staple max. Continue without Stapling?" is on OPE
5. Select "Cancel" in error message
6. Resume print and print of remaining data 1st page is canceled then print till
(21~2 page)is outputted with saddle fold+staple
7. An error message of "Please Remove paper from the Saddle stapler
compiler" is shown on CWS
【Issue】
An error message of CWS remains
【Expected behavior】
The error message of CWS doesn't remain after completing printing (cancel
the remaining data)
【Additional information】
・After Procedure, normal print and saddle fold+staple print can be done with
error display in CWS but an error message remains.
・When executing 48 page data by PolarisPro without Fiery by using SHARP
driver set as Multi-sheet Fold-Staple, 1~40 page(20 paper) is outputted first
then same error message as procedure 4 is shown, by selecting "Continue"
remaining data is printed and outputted to offset tray, by selecting "Cancel"
remaining data is not printed but canceled.
• FIT191572: Print job is canceled by fiery when print job is sent while Auto
Power Shut-Off
1) Enable Auto Power Shut-Off as Earlier on MFP Webpage
2) Send core_10_b.pdf (1082pages) as Letter LEF/1 copy
Results: Print job is canceled while printing
Click on the first or last page to see other MX-PE10 FIERY (serv.man45) service manuals if exist.