Read Sharp MX-PE10 FIERY (serv.man45) Technical Bulletin online
Page 7 of 8
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
2 Functionality to access to digital contents stored on copy-protected read-only media
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
©2012 Electronics For Imaging
Customer Support
Release Note
2) Set the Engine to Auto Power Shut off.
3) Load only 20 sheets of Letter in Trays to create frequent Load Paper condition.
4) Print the job.
3) Load only 20 sheets of Letter in Trays to create frequent Load Paper condition.
4) Print the job.
Results: Job printed 880 odd pages with paper load messages in the course of
Printing to this point. At this point on a Paper load prompt paper was loaded but the
job did not resume. Engine LCD showed Waiting and then CWS Errors and Alerts
section showed the message "Remove Misfed".
Printing to this point. At this point on a Paper load prompt paper was loaded but the
job did not resume. Engine LCD showed Waiting and then CWS Errors and Alerts
section showed the message "Remove Misfed".
• FIT38595: [POPO]"Check copier power and cable connection was observed"
on CWS while printing on 11X17fullbleed
1) Load less than 9 sheets of 11X17 papers on the engine.
2) Print a job to Northstar1.0 from driver with paper size as 11X17 Full Bleed.
2) Print a job to Northstar1.0 from driver with paper size as 11X17 Full Bleed.
Results: There was a paper out condition while printing and CWS did not prompt
for any load paper message. Instead "Check copier power and cable connection
was observed" on CWS and connection between Fiery and engine was lost. Both
POPO of server and engine was required to get rid of this. This issue happened
once in 3 trials.
for any load paper message. Instead "Check copier power and cable connection
was observed" on CWS and connection between Fiery and engine was lost. Both
POPO of server and engine was required to get rid of this. This issue happened
once in 3 trials.
• FIT38596: Job Cancelled by Engine at a Paper Empty scenario
1) Send a 1210 page A3, Color job to Fiery from PnP Direct queue.
2) After the first job is spooled and submitted send another job with the same
settings.
2) After the first job is spooled and submitted send another job with the same
settings.
Results: The first job completes and printing starts for the second job. The
second job cancels all of a sudden after printing 209 pages as per the job log.
CWS Errors and Alerts section shows "Check Copier Power and Cable
connections". No jam is seen on the engine. Consecutive jobs could be printed
from engine. On checking the two trays on which A3 papers were loaded, those
were found to be empty.
second job cancels all of a sudden after printing 209 pages as per the job log.
CWS Errors and Alerts section shows "Check Copier Power and Cable
connections". No jam is seen on the engine. Consecutive jobs could be printed
from engine. On checking the two trays on which A3 papers were loaded, those
were found to be empty.
Click on the first or last page to see other MX-PE10 FIERY (serv.man45) service manuals if exist.