Read Sharp MX-PE10 FIERY (serv.man45) Technical Bulletin online
Page 2 of 8
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
2 Functionality to access to digital contents stored on copy-protected read-only media
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
©2012 Electronics For Imaging
Customer Support
Release Note
• FIT38810: [POPO] Remove paper from finisher Upper&lower tray msg did not go
even after clearing the output trays
• FIT38568: Color separation issue observed while printing large job with mixed paper
size & color & b/w data
• FIT156263: Fake Paper jam/Misfed message showed in CWS while there is no Jam
or Misfed on the Engine LCD or Engine paper path
• FIT38595: [POPO]"Check copier power and cable connection was observed" on
CWS while printing on 11X17fullbleed
• FIT38596: Job Cancelled by Engine at a Paper Empty scenario
Steps to reproduce the Issue
• FIT38796: Load Custom paper message appears if print job as 8x20 inch paper
size
1) Put 8x20 inch paper on Bypass tray as plane paper
2) Open a file on Excel 2010
3) Open Printer properties then set paper size as Custom (Width:8 inch, Height:20
inch) i Media tab
4) Close Printer properties
5) Select PostScript Paper size in Page Layout
6) Perform print
2) Open a file on Excel 2010
3) Open Printer properties then set paper size as Custom (Width:8 inch, Height:20
inch) i Media tab
4) Close Printer properties
5) Select PostScript Paper size in Page Layout
6) Perform print
Results: Load Custom paper message appears on CWS
• FIT38273: Key continue typing when waked up from windows7 sleep mode
1) Make fiery to sleep from "start menu"
2) By pressing keyboard in the engine, awake the fiery from sleep mode.
2) By pressing keyboard in the engine, awake the fiery from sleep mode.
Results:
Key continue typing
• FIT191568: [RANK A] Check copier power and cable connection message is
shown when turn on MFP power
1) Turn off MFP and wait for 10 minutes or more
2) Turn on MFP, but Check copier power and cable connection message in CWS
2) Turn on MFP, but Check copier power and cable connection message in CWS
Click on the first or last page to see other MX-PE10 FIERY (serv.man45) service manuals if exist.