Read Sharp MX-PE10 FIERY (serv.man45) Technical Bulletin online
Page 3 of 8
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
2 Functionality to access to digital contents stored on copy-protected read-only media
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
©2012 Electronics For Imaging
Customer Support
Release Note
Results: CWS Errors and Alerts keeps showing the message “Check
copier power and
c
able “message is seen.
• FIT191557: Fiery cannot response and fall in no printing when remove Ethernet
cable during scanner calibration
1)Select Calibration on CWS
2) Calibration page is printed
3) Put Calibration chart on scanner, then perform PC scan
4) The network cable that connects with Fiery and MFP is pulled out
5) Perform Calibration after The calibration print succeeded message appears
on CWS.
2) Calibration page is printed
3) Put Calibration chart on scanner, then perform PC scan
4) The network cable that connects with Fiery and MFP is pulled out
5) Perform Calibration after The calibration print succeeded message appears
on CWS.
Results:
Retrieving measurements message box is remained on CWS. The
dialog box is closed if "CANCEL" button press, but scan job is not cancel. As
the result, any job cannot print on the fiery
the result, any job cannot print on the fiery
• FIT191570:When printing out with Saddle fold staple over 20 counts limitation
setting, occasionally an error message display timing is not proper or it
doesn't recovery (error release) on CWS Import a specific Test File to the Hold
queue and print it.
doesn't recovery (error release) on CWS Import a specific Test File to the Hold
queue and print it.
1. Open a word file of Letter LEF 24 page(Portrait)
2. Print with below driver settings
Media tab
2. Print with below driver settings
Media tab
⇒Paper size...Letter SEF
Finishing tab
⇒Staple mode...Saddle stitch
3.(24~22 page) is outputted with saddle fold+staple
4. When completing print till job (21~2 page), an error message of "20
Copies is Staple max. Continue without Stapling?" is on OPE
5. Select "continue" in error message
6. Resume print and 1st page is printed then print up to(21~1page) is
stored in finisher
7.OPE remains as Printing, on CWS an error message "Please Remove paper
from the Saddle stapler compiler" is shown.
8. When finisher cover is opened, message to remove paper from saddle is
shown in OPE.
9. Remove piled up print paper from saddle
10. Error message in OPE disappears and complete recovery. An error
message on CWS remains.
【Issue】
1.A message shown on OPE in Procedure 8 is delayed.
2.After recovery an error message of CWS remains.
【Expected behavior】
4. When completing print till job (21~2 page), an error message of "20
Copies is Staple max. Continue without Stapling?" is on OPE
5. Select "continue" in error message
6. Resume print and 1st page is printed then print up to(21~1page) is
stored in finisher
7.OPE remains as Printing, on CWS an error message "Please Remove paper
from the Saddle stapler compiler" is shown.
8. When finisher cover is opened, message to remove paper from saddle is
shown in OPE.
9. Remove piled up print paper from saddle
10. Error message in OPE disappears and complete recovery. An error
message on CWS remains.
【Issue】
1.A message shown on OPE in Procedure 8 is delayed.
2.After recovery an error message of CWS remains.
【Expected behavior】
Click on the first or last page to see other MX-PE10 FIERY (serv.man45) service manuals if exist.